ASTM B165 uns n04400 Tubing

ASTM B165 - 05(2014)

Standard Specification for Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube

Abstract

This specification covers nickel-copper alloy UNS N04400 in the form of cold-worked seamless pipe and tube. The material shall conform to the composition limits specified. Tension test, hydrostatic test, nondestructive electric test, and rounding method shall be done in accordance to the specified requirements.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification2 covers nickel-copper alloy UNS N044003 in the form of cold-worked seamless pipe and tube in the conditions shown in Table 1 and Table X1.1.

1.1.1 Hot worked material is available. Properties and permissible tolerances are to be agreed upon between the manufacturer and purchaser.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

More details: https://www.astm.org/Standards/B165.htm

ASTM B165 UNS N04400 Tube Specification

Grade Monel 400 Tube (UNS No. N04400)
B165 Monel 400 Tubes Size 15 NB to 150 NB IN
ASTM B165 Monel Tubing Wall Thickness .035" -.095', (special wall thicknesses available)
Specialized in Large Diameter Size
ASME SB165 N04400 Tubing Type Seamless / ERW / Welded / Fabricated / Hollow
Monel 400 B165 Tubes Schedule SCH5, SCH10, SCH40, STD, SCH80, SCH160
Alloy 400 SB 165 N04400 Tubes Condition astm b165 n04400 annealed, Hot-Finished, Cold-Drawn, Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
Nickel Alloy 400 ASTM B165 N04400 Tubes Form Round, Condenser, Hydraulic, Coiled, Heat-Exchanger, Capillary, Boiler, U-Tube, Rectangular, Square, Straight
ASTM B165 UNS NO 4400 Tubes Length Single Random, Double Random & Cut Length.
End Plain End, Beveled End, Treaded.
Marking All ASME SB165 UNS N04400 Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
Material Test Certificates (MTC) Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
ASTM B165 Tubing manufacturers
  • Sumitomo Metals, Japan
  • Nippon Steel Corporation, Japan
  • Kobe Special Tube, Japan
  • Sanyo Special Steel, Japan
  • Tubacex Tubos Inoxidables S.A., Spain
  • Schoeller Bleckmann, Austria
  • Seah Steel Corporation, Korea
We can also cut, thread, and groove ASTM B165 Monel Tubes to meet your specifications.

B165 Monel 400 Seamless Tube

Outside diameter Wall thickness Length
5.0 ~ 203.2mm As per requirement Upto 6 Meters

ASTM B165 Monel Welded Tube

Outside diameter Wall thickness Length
5.0 ~ 1219.2mm 1.0 ~ 15.0 mm Upto 6 Meters

Value Added services:

ASTM B165 Tubing services

ASME SB165 N04400 Tube Types

ASTM B165 UNS N04400 Gas Tube Ar 15 supplier
ASTM B165 UNS N04400 Gas Tube Ar 15
B165 Monel 400 Bourdon Tube Stockist
B165 Monel 400 Bourdon Tube
ASTM B165 Monel Capillary Tube
ASTM B165 Monel Capillary Tube
ASME SB165 N04400 Furnace Tube
ASME SB165 N04400 Furnace Tube
Monel 400 B165 Gas Tube
Monel 400 B165 Gas Tube
Alloy 400 SB 165 N04400 Heat Exchanger Tubes
Alloy 400 SB 165 N04400 Heat Exchanger Tubes
Nickel Alloy 400 ASTM B165 N04400 Mortar Tube
Nickel Alloy 400 ASTM B165 N04400 Mortar Tube
ASTM B165 UNS NO 4400 Radiant Tube
ASTM B165 UNS NO 4400 Radiant Tube
ASME SB165 UNS N04400 Square Tube
ASME SB165 UNS N04400 Square Tube

Monel 400 B165 Tube Nominal Tube Wall Thickness & Dimensions

B165 Monel 400 Tubes
(O.D.)
ASTM B165 Monel Tube Gauge
BWG 00 BWG 0 BWG 1 BWG 2 BWG 3 BWG 4 BWG 5 BWG 6 BWG 7 BWG 8 BWG 9 BWG 10 BWG 11 BWG 12 BWG 13 BWG 14 BWG 15 BWG 16 BWG 17 BWG 18 BWG 19 BWG 20 BWG 21 BWG 22 BWG 23 BWG 24
ASTM B165 UNS N04400 Tubing Wall Thickness (Inches)
0.380 0.340 0.300 0.284 0.259 0.238 0.220 0.203 0.180 0.165 0.148 0.134 0.120 0.109 0.095 0.083 0.072 0.065 0.058 0.049 0.042 0.035 0.032 0.028 0.025 0.022
ASME SB165 N04400 Tubes Inside Dia
1/4"  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A 0.010 0.032 0.060 0.084 0.106 0.120 0.134 0.152 0.166 0.180 0.186 0.194 0.200 0.206
3/8"  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A 0.015 0.045 0.079 0.107 0.135 0.157 0.185 0.209 0.231 0.245 0.259 0.277 0.291 0.305 0.311 0.319 0.325 0.331
1/2"  N/A  N/A  N/A  N/A  N/A 0.024 0.060 0.094 0.140 0.170 0.204 0.232 0.260 0.282 0.310 0.334 0.356 0.370 0.384 0.402 0.416 0.430 0.436 0.444 0.450 0.456
5/8"  N/A  N/A 0.025 0.057 0.107 0.149 0.185 0.219 0.265 0.295 0.329 0.357 0.385 0.407 0.435 0.459 0.481 0.495 0.509 0.527 0.541 0.555 0.561 0.569 0.575 0.581
3/4"  N/A 0.070 0.150 0.182 0.232 0.274 0.310 0.344 0.390 0.420 0.454 0.482 0.510 0.532 0.560 0.584 0.606 0.620 0.634 0.652 0.666 0.680 0.686 0.694 0.700 0.706
7/8" 0.115 0.195 0.275 0.307 0.357 0.399 0.435 0.469 0.515 0.545 0.579 0.607 0.635 0.657 0.685 0.709 0.731 0.745 0.759 0.777 0.791 0.805 0.811 0.819 0.825 0.831
1" 0.240 0.320 0.400 0.432 0.482 0.524 0.560 0.594 0.640 0.670 0.704 0.732 0.760 0.782 0.810 0.834 0.856 0.870 0.884 0.902 0.916 0.930 0.936 0.944 0.950 0.956
1 1/8" 0.365 0.445 0.525 0.557 0.607 0.649 0.685 0.719 0.765 0.795 0.829 0.857 0.885 0.907 0.935 0.959 0.981 0.995 1.009 1.027 1.041 1.055 1.061 1.069 1.075 1.081
1 1/4" 0.490 0.570 0.650 0.682 0.732 0.774 0.810 0.844 0.890 0.920 0.954 0.982 1.010 1.032 1.060 1.084 1.106 1.120 1.134 1.152 1.166 1.180 1.186 1.194 1.200 1.206
1 1/2" 0.740 0.820 0.900 0.932 0.982 1.024 1.060 1.094 1.140 1.170 1.204 1.232 1.260 1.282 1.310 1.334 1.356 1.370 1.384 1.402 1.416 1.430 1.436 1.444 1.450 1.456
1 3/4" 0.990 1.070 1.150 1.182 1.232 1.274 1.310 1.344 1.390 1.420 1.454 1.482 1.510 1.532 1.560 1.584 1.606 1.620 1.634 1.652 1.666 1.680 1.686 1.694 1.700 1.706
2" 1.240 1.320 1.400 1.432 1.482 1.524 1.560 1.594 1.640 1.670 1.704 1.732 1.760 1.782 1.810 1.834 1.856 1.870 1.884 1.902 1.916 1.930 1.936 1.944 1.950 1.956
2 1/4" 1.490 1.570 1.650 1.682 1.732 1.774 1.810 1.844 1.890 1.920 1.954 1.982 2.010 2.032 2.060 2.084 2.106 2.120 2.134 2.152 2.166 2.180 2.186 2.194 2.200 2.206
2 1/2" 1.740 1.820 1.900 1.932 1.982 2.024 2.060 2.094 2.140 2.170 2.204 2.232 2.260 2.282 2.310 2.334 2.356 2.370 2.384 2.402 2.416 2.430 2.436 2.444 2.450 2.456
2 3/4" 1.990 2.070 2.150 2.182 2.232 2.274 2.310 2.344 2.390 2.420 2.454 2.482 2.510 2.532 2.560 2.584 2.606 2.620 2.634 2.652 2.666 2.680 2.686 2.694 2.700 2.706
3" 2.240 2.320 2.400 2.432 2.482 2.524 2.560 2.594 2.640 2.670 2.704 2.732 2.760 2.782 2.810 2.834 2.856 2.870 2.884 2.902 2.916 2.930 2.936 2.944 2.950 2.956
3 1/4" 2.490 2.570 2.650 2.682 2.732 2.774 2.810 2.844 2.890 2.920 2.954 2.982 3.010 3.032 3.060 3.084 3.106 3.120 3.134 3.152 3.166 3.180 3.186 3.194 3.200 3.206
3 1/2" 2.740 2.820 2.900 2.932 2.982 3.024 3.060 3.094 3.140 3.170 3.204 3.232 3.260 3.282 3.310 3.334 3.356 3.370 3.384 3.402 3.416 3.430 3.436 3.444 3.450 3.456
3 3/4" 2.990 3.070 3.150 3.182 3.232 3.274 3.310 3.344 3.390 3.420 3.454 3.482 3.510 3.532 3.560 3.584 3.606 3.620 3.634 3.652 3.666 3.680 3.686 3.694 3.700 3.706
4" 3.240 3.320 3.400 3.432 3.482 3.524 3.560 3.594 3.640 3.670 3.704 3.732 3.760 3.782 3.810 3.834 3.856 3.870 3.884 3.902 3.916 3.930 3.936 3.944 3.950 3.956
4 1/4" 3.490 3.570 3.650 3.682 3.732 3.774 3.810 3.844 3.890 3.920 3.954 3.982 4.010 4.032 4.060 4.084 4.106 4.120 4.134 4.152 4.166 4.180 4.186 4.194 4.200 4.206
4 1/2" 3.740 3.820 3.900 3.932 3.982 4.024 4.060 4.094 4.140 4.170 4.204 4.232 4.260 4.282 4.310 4.334 4.356 4.370 4.384 4.402 4.416 4.430 4.436 4.444 4.450 4.456
4 3/4" 3.990 4.070 4.150 4.182 4.232 4.274 4.310 4.344 4.390 4.420 4.454 4.482 4.510 4.532 4.560 4.584 4.606 4.620 4.634 4.652 4.666 4.680 4.686 4.694 4.700 4.706
5" 4.240 4.320 4.400 4.432 4.482 4.524 4.560 4.594 4.640 4.670 4.704 4.732 4.760 4.782 4.810 4.834 4.856 4.870 4.884 4.902 4.916 4.930 4.936 4.944 4.950 4.956
5 1/4" 4.490 4.570 4.650 4.682 4.732 4.774 4.810 4.844 4.890 4.920 4.954 4.982 5.010 5.032 5.060 5.084 5.106 5.120 5.134 5.152 5.166 5.180 5.186 5.194 5.200 5.206

Alloy 400 SB 165 N04400 Hydraulic Tube Burst Pressure

(Barlow’s Formula)

P = (2ST÷D) (45,000 PSI Min Tensile Stress)
P = Burst Pressure
S = 45,000 lbs. PSI Tensile Strength
T = Nominal Wall Thickness
D = OD/ Outside Diameter

1/4" x 0.035 - 12,600 5/8" x 0.083 - 11,950 1-1/8" x 0.065 - 5,200
1/4 x 0.049 - 17,640 3/4 x 0.035 - 4,200 1-1/8" x 0.083 - 6,640
5/16" x 0.035 - 10,080 3/4" x 0.049 - 5,880 1-1/8 x 0.95 - 7,600
5/16 x 0.049 - 14,110 3/4 x 0.065 - 7,800 1-1/8 x 0.109 - 8,720
3/8" x 0.035 - 8,400 3/4" x 0.083 - 9,960 1-1/4" x 0.065 - 4,680
3/8 x 0.049 - 11,760 3/4 x 0.095 - 11,400 1-1/4 x 0.083 - 5,975
3/8" x 0.065 - 15,600 3/4" x 0.109 - 13,080 1-1/4 x 0.095 - 6,840
7/16 x 0.035 - 7,200 7/8 x 0.049 - 5,040 1-1/4" x 0.109 - 7,848
7/16" x 0.049 - 10,080 7/8" x 0.065 - 6,685 1-1/4 x 0.120 - 8,640
7/16 x 0.065 - 13,370 7/8 x 0.083 - 8,535 1-1/2" x 0.083 - 4,980
1/2" x 0.035 -  6,300 7/8" x 0.095 - 9,770 1-1/2 x 0.095 - 5,700
1/2 x 0.049 -  8,820 1" x 0.049 - 4,410 1-1/2" x 0.109 - 6,540
1/2" x 0.065 - 11,700 1" x 0.065 - 5,850 1-1/2 x 0.120 - 7,200
5/8 x 0.035 -  5,040 1" x 0.083 - 7,470 2" x 0.134 - 6,030
5/8" x 0.049 -  7,055 1" x 0.095 - 8,550 2" x 0.188 - 8,460
5/8 x 0.065 -  9,360

Note: To compute safe working pressures, above Burst Pressures should be divided by your desired safety factor.

ASME SB165 UNS N04400 Tube Equivalent Grades

ALLOY WERKSTOFF NR. UNS JAPANESE JIS BS GOST AFNOR ISO EN
Alloy 400 Tube 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M 9722 NiCu30Fe