ASTM B564 UNS N06625 Flanges
ASTM B564 - 17a
ASTM B564 is a Standard Specification for Nickel Alloy Forgings
ASME SB 564 specification covers nickel alloy forgings. These alloys are classified into different grades according to their chemical composition. A chemical analysis shall be employed on each alloy in order to determine its chemical composition. Grain size and mechanical properties like tensile strength, yield strength, and elongation shall be measured. A tension test and nondestructive ultrasonic test shall be done on each specimen.
ASTM B564 specification refers to Nickel Alloy Forgings and Forged Fittings for Nickel Alloy, Inconel, Hastelloy and Monel Alloys in ASTM B564 UNS N04400, UNS N06625, UNS N06600, UNS N10276, GR N04400, UNS N08825, N08810, N06022, UNS N10675 and SB 564 UNS N07718 .
ASTM B564 Material Stock
- ASTM B564 UNS N06600
- ASTM B564 UNS N06601
- ASTM B564 UNS N06625
- ASTM B564 UNS N08800
- ASTM B564 UNS N08825
- ASTM B564 UNS N04400
- ASTM B564 UNS N10276
- ASTM B564 UNS N06022
- ASTM B564 UNS N10665
- ASTM B564 UNS N02200
- ASTM B564 UNS N02201
ASTM B564 Forging include:
- ASTM B564 Impellers
- ASTM B564 Flanges / valves and seats
- ASTM B564 Shafts
- ASTM B564 Hollows / diaphragms
- ASTM B564 Rings
- ASTM B564 Pinions and gears
- ASTM B564 Casings and half casings
- ASTM B564 Crossheads / supports
- ASTM B564 Piston rods
Nickel Alloy Grades comes under the specification:
|
|
ASTM B564 UNS N06625 Flanges Specification
| Alloy 625 B564 Flange size | 1/2" - 60" |
|---|---|
| Standards | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI, ASME, BS, DIN, EN, GOST. |
| B564 UNS NO 8825 Flanges Class / Pressure | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc |
| Main Types | Forged / Threaded / Screwed / Plate |
| Alloy 825 B564 Flanges Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Types of B564 N04400 Flanges |
|
| Alloy 400 B564 Flanges manufacturers |
|
| Fastest Delivery in | Poland, USA, Iran, Italy, UAE, Singapore, Australia, UK, Canada, Malaysia |
| B564 N10276 Flange Face | Raised Face (RF), Flat Face(FF), Ring-Type Joint (RTJ), Tongue-and-Groove (T&G), Male-and-Female (M&F) |
| Application |
|
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
- ASME B1.20.1, Pipe Threads, General Purpose
- ASME B16.1, Cast Iron Flanges and Flanged Fittings Classes 25, 125 and 250
- ASME B16.5, B564 N06625 Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24
- ASME B16.11, Alloy 625 B564 Forged Fittings, Socket Welding and Threaded
- ASME B16.25, Buttwelding Ends
- ASME B16.36, B564 NO 8825 Orifice Flanges
- ASME B16.47, Large Diameter Alloy 825 B564 Flanges NPS 26 Through NPS 60
- ASME B31.1, Power Piping
- ASME B31.3, Process Piping
- ASME B46.1, Surface Texture (Surface Roughness, Waviness, and Lay)
SB-564 specification covers forgings of:
Alloy Type |
UNS Number(s) |
Fe-Ni-Cr-Mo-N |
N08367 |
Low-carbon Cr-Ni-Fe-N |
R20033 |
Low-carbon Ni-Cr-Mo |
N06035, N06058, N06059, N06044 |
Low-carbon Ni-Cr-Mo-Cu |
N06200 |
Low-carbon Ni-Cr-Mo-W |
N06686 |
Low-carbon Ni-Fe-Cr-Mo-Cu |
N08031, N08034 |
Low-carbon Ni-Mo-Cr |
N10276, N06022, N10362 |
Low-carbon Ni-Mo-Cr-Ta |
N06210 |
Ni |
N02200 |
Ni-Co-Cr-Si |
N12160 |
Ni-Cr-Co-Mo |
N06617 |
Ni-Cr-Fe |
N06600, N06603, N06690 |
Ni-Cr-Fe-Al |
N06025 |
Ni-Cr-Fe-Si |
N06045 |
Ni-Cr-Mo-Nb |
N06625 |
Ni-Cr-Mo-Si |
N06219 |
Ni-Cr-Mo-W |
N06110 |
Ni-Cr-W-Mo |
N06230 |
Ni-Cu |
N04400 |
Ni-Fe-Cr |
N08120, N08800, N08810, N08811 |
Ni-Fe-Cr-Mo-Cu |
N08825 |
Ni-Fe-Cr-W |
N06674 |
Ni-Mo |
N10665, N10675, N10629 |
Ni-Mo-Cr-Fe |
N10242, N10624 |
The nickel-iron-chromium alloys are N08120, N08800, N08810, and N08811. Alloy N08800 is normally employed in service temperatures up to and including 1100°F (593°C). Alloys N08810, N08120, and N08811 are normally employed in service temperatures above 1100°F (593°C) where resistance to creep and rupture is required, and are annealed to develop controlled grain size for optimum properties in this temperature range.
SECTORS
- Aerospace
- Vehicles
- Pharmaceutical
- Forestry & Agriculture
- Heritage
- Nuclear
- Lifting Gear
- Rail
- Oil & Gas
- Power Generation
Value Added services:

Alloy 625 ASTM B564 Flange Pressure Rating
| Temp., °C | ASTM B564 N06625 Flanges Working Pressures by Classes, bar | ||||||
|---|---|---|---|---|---|---|---|
| 150 | 300 | 400 | 600 | 900 | 1500 | 2500 | |
| -29 ~ 38 | 20.0 | 51.7 | 68.9 | 103.4 | 155.1 | 258.6 | 430.9 |
| 50 | 19.5 | 51.7 | 68.9 | 103.4 | 155.1 | 258.6 | 430.9 |
| 100 | 17.7 | 51.5 | 68.7 | 103.0 | 154.6 | 257.6 | 429.4 |
| 150 | 15.8 | 50.3 | 66.8 | 100.3 | 150.6 | 250.8 | 418.2 |
| 200 | 13.8 | 48.6 | 64.8 | 97.2 | 145.8 | 243.4 | 405.4 |
| 250 | 12.1 | 46.30 | 61.7 | 92.7 | 139.0 | 231.8 | 386.2 |
| 300 | 10.2 | 42.9 | 57.0 | 85.7 | 128.6 | 214.4 | 357.1 |
| 325 | 9.3 | 41.4 | 55.0 | 82.6 | 124.0 | 206.6 | 344.3 |
| 350 | 8.4 | 40.3 | 53.6 | 80.4 | 120.7 | 201.1 | 335.3 |
| 375 | 7.4 | 38.9 | 51.6 | 77.6 | 116.5 | 194.1 | 323.2 |
| 400 | 6.5 | 36.5 | 48.9 | 73.3 | 109.8 | 183.1 | 304.9 |
| 425 | 5.5 | 35.2 | 46.5 | 70.0 | 105.1 | 175.1 | 291.6 |
| 450 | 4.6 | 33.7 | 45.1 | 67.7 | 101.4 | 169.0 | 281.8 |
| 475 | 3.7 | 31.7 | 42.3 | 63.4 | 95.1 | 158.2 | 263.9 |
| 500 | 2.8 | 28.2 | 37.6 | 56.5 | 84.7 | 140.9 | 235.0 |
| 538 | 1.4 | 16.5 | 22.1 | 33.1 | 49.6 | 82.7 | 137.9 |
| 550 | - | 13.9 | 18.6 | 27.9 | 41.8 | 69.7 | 116.2 |
| 575 | - | 9.4 | 12.6 | 18.9 | 28.3 | 47.2 | 78.6 |
| 600 | - | 6.6 | 8.9 | 13.3 | 19.9 | 33.2 | 55.3 |
| 625 | - | 5.1 | 6.8 | 10.3 | 15.4 | 25.7 | 42.8 |
| 650 | - | 4.7 | 6.3 | 9.5 | 14.2 | 23.6 | 39.4 |
Manufacturer of:
| B564 UNS N06625 Weld Neck Flanges | Alloy 400 B564 Paddle Blank Flanges |
| Alloy 625 B564 WNRF Flanges | B564 UNS N10276 Paddle Spacer Flanges |
| B564 UNS NO 8825 Slip On Flanges | Inconel 625 B564 Spectacle Blind Flanges |
| Alloy 825 B564 SORF Flanges | ASME SB564 N06625 Nippo Flanges |
| B564 UNS N04400 Spectacle Blind Flanges | B564 MONEL 400 Lap Joint Flanges |
| Alloy 400 B564 Socket Weld Flanges | B564 UNS N06625 Screwed (SCRD) Flanges |
| B564 UNS N10276 SWRF Flange | Alloy 625 B564 LJ Flange |
| Inconel 625 B564 Blind Flanges | B564 UNS NO 8825 Closet Flange |
| ASME SB564 N06625 BLRF Flange | Alloy 825 B564 Companion Flange |
| B564 MONEL 400 Threaded Flanges | B564 UNS N04400 Pipe Flange |
| B564 UNS N06625 Forged Flanges | Alloy 400 B564 Blank Flange |
| Alloy 625 B564 Plate Flange | B564 UNS N10276 Exhaust Flange |
| B564 UNS NO 8825 Orifice Flange | Inconel 625 B564 Girth Flange |
| Alloy 825 B564 High Hub Flanges | ASME SB564 N06625 Quick Flange |
| B564 UNS N04400 Flat Flange | B564 MONEL 400 Split Flange |
| Alloy 400 B564 Loose Flanges | B564 UNS N06625 Swivel Flange |
| B564 UNS N10276 Square Flange | Industrial Alloy 625 B564 Flange |
| Inconel 625 B564 Ring Type Joint Flanges | Alloy 825 B564 Reducing SORF Flanges |
| ASME SB564 N06625 RTJ Flange | B564 UNS N04400 SORF Flange RTJ |
| B564 MONEL 400 Groove & Tongue Flanges | Alloy 400 B564 SORF Flanges with Hub |
| B564 UNS N06625 Expander Flanges | B564 UNS N10276 SORF Flange 150# |
| Alloy 625 B564 Screwed Flanges | Inconel 625 B564 WNRF Reducing Flanges |
| B564 UNS NO 8825 Awwa Flange | ASME SB564 N06625 WNRF RTJ Flange |
| Alloy 825 B564 Long Weld Neck Flanges | B564 MONEL 400 WNRF Flange Class 300 |
ASTM B564 Material Price in India
- Forged DN200 Alloy 200 Astm B564 UNS N02200 2.4066 WN flange
US $5.00-$7.00/ Piece - ASTM B564 UNS N06600 ALLOY 600 150# Flange manufacturer
US $118.69-$126.76/ Piece - ASTM B564 Inconel 625 Threaded / Screwed Flanges Price List
US $2.00-$30.00/ Piece - 1.5x0.75" ASME b16.11 ASTM B564 UNS 06625 SW forged tee fittings
US $1.00-$20.00/ Piece - Great Quality ASTM B564 Inconel 625 Threaded / Screwed Flanges Price
US $1.00-$20.00/ Set
Alloy 825 ASTM B564 Flanges Chemical Composition
| Alloy Name | BS | UNS | BS EN | Others | Ultimate Tensile Strength N/mm² | Minimum Yield Strength N/mm² | Elongation % | Hardness HB |
|---|---|---|---|---|---|---|---|---|
| Alloy 600 | NA14 | N06600 | BS3076 | 550 | 240 | 30 | ||
| Alloy 625 (Inconel®) | NA21 | N06625 | AMS 5666 | 690 | 275 | 30 | ||
| Alloy 718 | N07718 | AMS 5662, 5663, 5664 | 1034 | 827 | 17 | 313-354 | ||
| API6A718 | N07718 | API6A718 | 1034 | 827 | 17 | 313-354 | ||
| Alloy 825 | NA16 | N08825 | BS3076 | 590 | 220 | 30 | ||
| Hastelloy C276 | N10276 | HASTELLOY® | 690 | 283 | 40 | |||
| Alloy 80A | BS3076 NA20 | N07080 | BS2 HR1 | 1000 | 620 | 20 | ||
| Monel Alloy 400 | NA13 | N04400 | BS3076 | 480-600 | 170-415 | 20-35 | 35 HRC max | |
| Monel Alloy K500 | NA18 | N05500 | BS3076 | 970-1000 | 690-760 | 15-20 | 27-35 HRC |


