ASTM F1554 Grade 36 threaded rod and anchor bolts

ASTM F1554 - 17e1

ASTM F1554 is a Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield StrengthASTM F1554 Bolts

Anchor bolts are a kind of fastener that can be primarily used to connect structural as well as non-structural components to concrete. These ASTM F1554 Anchor Bolts are available in various designs and different alloy grades such as carbon steel, carbon boron, alloy steel, or even high strength low alloy steel. However, according to the ASTM F1554 specification, these  Anchor Bolts are available only in three specified yield strengths i.e. - 36 KSI or 55 KSI, and 105 KSI.

Applications of these ASTM F1554 Bolts are very often seen in constructions involving concrete for eg, they are used in columns for buildings, column supports for highway signs as well as for street lighting or for traffic signals and for steel bearing plates. However, the application of these bolts would depend on the KSI specified by the buyer. The ASTM F1554 Headed Anchor Rods are required to adhere to specified chemistry per the specification and they are to be examined by performing a heat and product analysis. Moreover, these ASTM F1554 Grade 55 Anchor Bolts are subjected to test their conformance with mechanical properties. Per usual, the parameters indicative of conformance include values for tensile strength, yield strength, reduction of area, elongation, and stress area. An additional clause mentioned in the specification indicates that the ASTM F1554 Gr. 105 Anchor Bolt is required to also meet some more specified values. These would include the ASTM F1554 Grade 36 Threaded Rod being tested for not only nominal size, body diameter, bend section but also for length, bend angle, as well as coated length.

ASTM F1554 Specification

ASTM F1554 Bolt Type ASTM F1554 Anchor Bolt, Carriage Bolt, Flange Bolt, 12 Point Bolt, Hex and Hex Flange Bolts, Hex Head Cap Screw, Place Bolt, Socket Head Cap Screws, Hanger Bolt, Hexagon Bolt / Tap Bolt, Lag Bolt, Machine Bolt, Plow Bolt, Shoulder Bolt, Square Head Bolt, Stud Bolt, T-Head Bolt, Toggle Bolt, U-Bolt
Inch #0000 -3" (customized sizes available)
Metric M1.6 - M48
Length Customized Length
Grade Non Ferrous, 12.9, 10.9, 9.8, 8.8, 5.8, 4.6, B7, 2, 5, 8, L9
Material Brass, Bronze / Copper Base Alloy, Copper, Molybdenum, Steel, Hardened Steel, Stainless Steel, Superalloy (Inconel 718 Bolts, Hastelloy, Monel, Titanium, Exotic Metals, Other
Method Cold forming, Hot Forging, Wire Forming
Fastener Standards ASME / ANSI, BS, DIN, ISO, JIS, SAE, Other
Application Industries & uses Agriculture, Automotive, Construction and Infrastructure, Energy, Transportation
Testing Methods ASTM E38, E76 and E354, ASTM E53, E54, E62, E75and E478, ASTM E34, E101 and E227, ASTM E 120 and E1409.
Threads Configuration ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Thread Diameters M6 to M36
Certification Dual Certified As per ASTM & ASME Codes

ASME SF1554 Bolts stockist in India- ASME, DIN, AS, BS

ASTM F1554 Bolts Coatings and plating as well as plain finished oil and tempered is available as required by the end user such as Zinc plating, Cadmium plating, Xylan ® coating, Dupont Teflon ® coating, Hot Dip Galvanized coating, Auge Antifrix ® coating, Sermagard ® coating and Niwat 1000 ® plating.

Teflon coated bolts

ASTM F1554 Grades

F1554 Grade 36 Low carbon, 36 ksi yield steel anchor bolts
F1554 Grade 55 High strength, low alloy, 55 ksi yield steel anchor bolts
F1554 Grade 105 Alloy, heat treated, high strength 105 ksi yield steel anchor bolts

ASTM F1554 Bolts Chemical Properties

Element Grade 36 Grades 55 and 105
Sizes up to 3/4 Sizes over 3/4 to 1-1/2 Sizes over 1-1/2 to 4
Carbon (max) 0.26% 0.27% 0.28%
Manganese * 0.60 - 0.90% 0.60 - 0.90%
Phosphorus, max 0.04% 0.04% 0.04% 0.040%
Sulfur, max 0.05% 0.05% 0.05% 0.050%
Copper, min (when specified) 0.20% 0.20% 0.20% 0.20%

ASTM F1554 Bolts Mechanical Properties

Grade Size inches Tensile, ksi Yield, ksi min Yield, MPa min Elong. % min RA % min
36 1⁄2 - 4 58 - 80 36 248 23 40
55 1⁄2 - 2 75 - 95 55 380 21 30
21⁄4 - 21⁄2 75 - 95 55 380 21 22
23⁄4 - 3 75 - 95 55 380 21 20
31⁄4 - 4 75 - 95 55 380 21 18
105 1⁄2 - 3 125 - 150 105 724 15 45
  • Stamping of F1554 bolts with manufacturer's identification is a supplemental requirement (S2)
  • Color coding is required unless the grade is stamped in accordance with supplemental requirement (S3).
  • When Grade 36 is specified, a weldable Grade 55 may be furnished at the supplier's option.

ASTM F1554 Anchor Bolts Sizes

ASTM F1554 ANCHOR BOLTS TYPE
SIZE
GRADE
ASME
ISO
ASTM
Anchor Socket Head Cap Bolts
M1.6 to M64
12.9
B18.3.1 M
4762
A574M
Anchor Socket Low Head Cap Bolts
M4 to M20
10.9
Anchor Socket Head Shoulder Bolts
M6 to M24
012.9
B18.3.3M
Anchor Countersunk Socket Head Bolts
M3 to M20
012.9
B18.3.5M
10642
F835M
Anchor Button Head Socket Bolts
M3 to M12
012.9
B18.3.4M
7380
F835M
Anchor Flange Button Head Socket Bolts
M3 to M10
012.9
F835M
Anchor Knurled Point Socket Set Bolts
M3 to M20
45H
B18.3.6M
4029
F912M
Anchor Flat Point Socket Set Bolts
M6 to M12
45H
B18.3.6M
4026
F912M
Anchor Dog Point Socket Set Bolts
M3 to M20
45H
B18.3.6M
4028
F912M
Anchor Cone Point Socket Set Bolts
M3 to M12
45H
B18.3.6M
4027
F912M
Anchor Plain Point Socket Set Bolts
M3 to M20
45H
B18.3.6M
4029
F912M
Anchor Taper Pressure Plug
M8 to M22
-

Check ASTM F1554 Grade 36 Threaded Rod, ASTM F1554 Bolts pressure rating and weight chart.

ASTM F1554 ANCHOR BOLTS TYPE
SIZE
PROPERTY CLASS
TENSILE STRENGTH
STANDARD
ASTM F1554 Anchor Hex Head Bolts
M4 to M80
10.9
1040N / mm2 min
ISO 4017 (Full Thread)
ISO 4014 (Half Thread)

SIZE
PROPERTY CLASS
STANDARD
M6 to M42
10
ISO 4032
M6 to M20 (Gr.8)
M10 to M24 (Gr.10)
8 & `10
DIN 982
M6 to M20 (Gr.8)
M10 to M24 (Gr.10)
8 & 10
DIN 985
M6 to M12
8
DIN 929

SIZE
HARDNESS
STANDARD
3mm to 39mm
HV (430 to 530)
DIN 7980
3mm to 39mm
HV (430 to 530)
DIN 127 B
12mm to 30mm
HV (300 to 370)
IS 2016
12mm to 56mm
Rockwell 26 to 45 (HDG)
Rockwell 38 to 45 (Coated)
ASTM F436M

Available standard: DIN 934, ISO 4033, ISO 4032, DIN 935,DIN 936, ASME B18.2.2, ASME B18.2.4.6M, DIN 976, DIN 975, DIN 2510, DIN 939, DIN 940, DIN 938

PTFE coated bolts