ASTM F835 grade DH Bolts

ASTM F835 - 16

ASTM F835 is a Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

Alloy steel grade type of fasteners, namely hexagon socket button head cap screws or as referred to as SBHCS as well as flat countersunk head cap screws or shortened to SFHCS are covered by the American Society for Testing and Materials F835 specification. This grade of F835 Socket Button Head Cap Screw is to be fabricated from alloy steel that usually is involved by using a fine grain practice. This Fine Grain Practice is a technique used in steelmaking practice, that is designed to be used for any other steel grades for e.g. F835 Flange Bolt that is not stainless steel. The intension of fine grain practise is to produce killed steel.

This killed steel, in turn, is capable of meeting the requirements that have been set by the specification for the grain size of the F835 Bolts. Usually, the addition of an element in the alloy of F835 Studs in order to produce a finer grain size could include elements such as aluminium, niobium, titanium, or even vanadium. However, the addition of these elements is at the discretion of the F835m Hex Bolts suppliers. Moreover, the quenched and tempered F835 Screw has a heat analysis to conform its chemical composition as well as other tests to check its mechanical properties i.e tensile strength, hardness, elongation etc.

ASTM F835 Specification

ASTM F835 Bolt Type ASTM F835 Anchor Bolt, Carriage Bolt, Flange Bolt, 12 Point Bolt, Hex and Hex Flange Bolts, Hex Head Cap Screw, Place Bolt, Socket Head Cap Screws, Hanger Bolt, Hexagon Bolt / Tap Bolt, Lag Bolt, Machine Bolt, Plow Bolt, Shoulder Bolt, Square Head Bolt, Stud Bolt, T-Head Bolt, Toggle Bolt, U-Bolt
Inch #0000 -3" (customized sizes available)
Metric M1.6 - M48
Length Customized Length
Grade Non Ferrous, 12.9, 10.9, 9.8, 8.8, 5.8, 4.6, B7, 2, 5, 8, L9
Material Brass, Bronze / Copper Base Alloy, Copper, Molybdenum, Steel, Hardened Steel, Stainless Steel, Superalloy (Inconel 718 Bolts, Hastelloy, Monel, Titanium, Exotic Metals, Other
Method Cold forming, Hot Forging, Wire Forming
Fastener Standards ASME / ANSI, BS, DIN, ISO, JIS, SAE, Other
Application Industries & uses Agriculture, Automotive, Construction and Infrastructure, Energy, Transportation
Testing Methods ASTM E38, E76 and E354, ASTM E53, E54, E62, E75and E478, ASTM E34, E101 and E227, ASTM E 120 and E1409.
Threads Configuration ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Thread Diameters M6 to M36
Certification Dual Certified As per ASTM & ASME Codes

ASME SF835 Bolts stockist in India- ASME, DIN, AS, BS

ASTM F835 Bolts Coatings and plating as well as plain finished oil and tempered is available as required by the end user such as Zinc plating, Cadmium plating, Xylan ® coating, Dupont Teflon ® coating, Hot Dip Galvanized coating, Auge Antifrix ® coating, Sermagard ® coating and Niwat 1000 ® plating.

Teflon coated bolts

1. Scope

1.1 ASTM F835 specification covers the requirements for quenched and tempered alloy steel hexagon socket button (SBHCS) 0.060 through 0.625 thread sizes and flat countersunk (SFHCS) 0.060 through 1.5 thread sizes head cap screws having material properties for high-strength requirements.

1.2 ASTM F835 Fasteners meeting this specification are intended for shear-type applications and have tensile requirements ranging from 122 to 150 ksi.

1.3 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard

BEST PRICE ! READY STOCK OF ASTM F835 Screws
  • ASTM F835 Alloy Steel Screws
  • F835 Hex Set Screw
  • Heat Treated Screw
  • F835 Socket Screw
  • ASME SF 835 Pan Head Screw
  • F835 Minimum Tensile Strength Screw
  • Machine Screw
  • F835 Metric Socket Head Cap Screw
  • Alloy Steel Bolts
  • F835M Socket Head Cap Screw
  • UNS S30300 Bolts
  • ASTM F835 Socket Head Cap Screws
  • Alloy Steel Socket Button
  • ASTM F835 Cap Screw
  • High Strength Screws
  • F835 Flat Countersunk Head Cap Screws
  • ASTM F835 Head Cap Screws
  • Alloy Steel Cap Screw

Available standard: DIN 934, ISO 4033, ISO 4032, DIN 935,DIN 936, ASME B18.2.2, ASME B18.2.4.6M, DIN 976, DIN 975, DIN 2510, DIN 939, DIN 940, DIN 938

PTFE coated bolts