ASTM B333 Plate

Supplier and exporter of ASTM B333 Plate, ASTM B 333 UNS N10665, ASTM B333 UNS N10675, ASTM B333 Sheet. Check ASTM B333 Nickel-Molybdenum Alloy Plate, Sheet, and Strip price in India

ASTM B333 - 03(2013)

ASTM B333 is a Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip

ASTM B333 specification covers plate, sheet, and strip of nickel-molybdenum alloys covering UNS N10001, N10665, N10675, N10629, and N10624 for use in general corrosive service. ASTM B333 Plate analysis shall be performed on the alloy and shall conform to the chemical composition requirement in nickel, molybdenum, iron, chromium, carbon, silicon, cobalt, manganese, phosphorus, sulfur, vanadium, nickel, molybdenum, aluminum, columbium, copper, tantalum, titanium, tungsten, zirconium, and magnesium. Sheet and strip shall undergo hot or cold rolling, solution annealing, and descaling unless solution annealed in atmosphere. Plates shall undergo hot or cold rolling, solution annealing, and descaling.

Looking to buy Alloy 600 Plate? Inconel 600 Plate?

Check Today's price of Alloy 600 Plate in India

Alloy 600 Plate supplier

ASTM B333 Material in Stock

ASTM B333 UNS N10001
ASTM B333 UNS N10665
ASTM B333 UNS N10675
ASTM B333 UNS N10629
ASTM B333 UNS N10624

  • ASTM B333 Clad Plate
  • ASTM B333 Clad Sheet
  • ASTM B333 Plate
  • ASTM B333 Sheet
  • ASME SB333 Plate
  • ASME SB333 Sheet
  • ASTM B333 Coils
  • ASTM B333 Hot Rolled Plates
  • ASTM B333 Shim Sheets
  • ASTM B333 Cold Rolled Plates
  • ASTM B333 slitting coils
  • ASTM B333 Perforated sheet
  • ASTM B333 Polished Cold Drawn Plates
  • ASTM B333 Strips
  • ASTM B333 Foils
  • ASTM B333 Rolls
  • ASTM B333 Plain Sheet
  • ASTM B333 2B Plate
  • ASTM B333 2D Plate
  • ASTM B333 BA NO(8) Plate
  • ASTM B333 Polished Plates

The following ASTM B333 products are covered under this specification:

1.2.1 ASTM B333 Sheet and Strip—Hot or cold rolled, solution annealed, and descaled unless solution anneal is performed in an atmosphere yielding a bright finish.

1.2.2 ASTM B333 Plate—Hot or cold rolled, solution annealed, and descaled.

ASTM B333 specification covers plate, sheet, and strip of nickel-molybdenum alloys (UNS N10001, N10665, N10675, N10629, and N10624)* for use in general corrosive service.

ASTM B333 Chemical Composition

Element Composition Limits, %  
Alloy 
N10001
Alloy 
N10665
Alloy 
N10675
Alloy 
N10629
Alloy 
N10624
Nickel remainderA remainderA 65.0 min remainderA Bal
Molybdenum 26.0–30.0 26.0–30.0 27.0–32.0 26.0–30.0 21.0-25.0
Iron  4.0–6.0  2.0 max  1.0–3.0  1.0–6.0  5.0-8.0
Chromium  1.0 max  1.0 max  1.0–3.0  0.5–1.5  6.0-10.0
Carbon, max  0.05  0.02  0.01  0.01  0.01
Silicon, max  1.0  0.10  0.10  0.05  0.10
Cobalt, max  2.5  1.00  3.0  2.5  1.0
Manganese, 
max
 1.0  1.0  3.0  1.5  1.0
Phosphorus, 
max
 0.04  0.04  0.030  0.04  0.025
Sulfur, max  0.03  0.03  0.010  0.01  0.01
Vanadium  0.2–0.4  ...  0.20 max  ...  ...
Nickel plus 
Molybdenum
 ...  ... 94.0–98.0    ...
Aluminum  ...  ...  0.50 max  0.1–0.5  0.5
Columbium 
(Nb), max
 ...  ...  0.20    ...
Copper, max  ...  ...  0.20  0.5  0.5
Tantalum, 
max
 ...  ...  0.20    ...
Titanium, 
max
 ...  ...  0.20    ...
Tungsten, 
max
 ...  ...  3.0    ...
Zirconium, 
max
 ...  ...  0.10    ...
Magnesium, 
max
 ...  ...  ...  ...  ...

ASTM B333 Mechanical Properties

Alloy Thickness, 
in. (mm)
Tensile Strength, 
min, psi (MPa)
Yield Strength 
(0.2 % Offset), 
min, psi (MPa)
Elongation 
in 2 in. 
(50.8 mm) 
or 4DA 
min, %
Rockwell 
Hardness,B 
max
    Sheet and Strip      
N10001 Under 3/16 (4.76) 115 000 (795) 50 000 (345) 45 100 HRB
N10665 Under 3/16 (4.76) 110 000 (760) 51 000 (350) 40 100 HRB
N10675 Under 3/16 (4.76) 110 000 (760) 51 000 (350) 40 100 HRB
N10629 Under 3/16 (4.76) 110 000 (760) 51 000 (350) 40 100 HRB
N10624 Under 3/16 (4.76) 104 000 (720) 46 000 (320) 40 100 HRB
    Plate      
N10001 3/16 to 21/2 in. (4.76 to 63.5 mm), incl 100 000 (690) 45 000 (310) 40 100 HRB
N10665 3/16 to 21/2 in. (4.76 to 63.5 mm), incl 110 000 (760) 51 000 (350) 40 100 HRB
N10675 3/16 to 21/2 in. (4.76 to 63.5 mm), incl 110 000 (760) 51 000 (350) 40 100 HRB
N10629 3/16 to 21/2 in. (4.76 to 63.5 mm), incl 110 000 (760) 51 000 (350) 40 100 HRB
N10624 3/16 to 21/2 in. (4.76 to 63.5 mm), incl 104 000 (720) 46 000 (320) 40 100 HRB
A D refers to the diameter of the tension specimen.

Pipe, Tube & Tubing

Sheet, Plate

Round Bar & fasteners


Trademark Notice

Specialized in Aircraft Materials & Aerospace Materials