ASTM F593 Bolts

Supplier and exporter of ASTM F593 Bolts, ASTM F593 Anchor Bolt, ASTM F593 Flange Bolt, ASTM F593 Tap Bolt, ASTM F593 Lag Bolt

ASTM F593M Bolts, ASTM F593M Stainless Steel Bolts, ASTM F593 Hex Cap Screws, ASTM F593 Hex Bolts, ASTM F593 Studs Exporter in India. Check ASTM F593 Bolts Price in India

ASTM F593 - 17

ASTM F593 is a Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

ASTM F593 specification covers the requirements for stainless steel bolts, hex cap screws, and studs 0.25 to 1.50 in., inclusive, in nominal diameter in a number of alloys in common use and intended for service applications requiring general corrosion resistance. Hitesh Steel can work with a number of other less common grades of ASTM F593.ASTM F593 Bolts

ASTM F593 bolts can be used for many different applications that include fastening wood, steel, and other construction materials for projects such as docks, bridges, highway structures, and buildings. ASTM F593 Hex Bolts and ASTM F593 Hex Head Bolts is some of the toughest fasteners. These ASME SF593 sturdy fasteners are used to connect heavy materials.

Hitesh Steel stock a wide variety of ASTM F593 Long Bolts and ASME SF593 12 Point Bolts in India. There are hundreds of combinations of materials, heads, threads, plating, heat treating, and secondary operations. We are manufacturer & supplier of ASTM F593 studs such as All-Thread, Tap-End, Double-End Studs, and Combination Studs, different types of nuts such as Hex Nuts, Heavy Hex Nuts, Overtapped Nuts, Tommy Hole Nuts, Spherical-Faced Nuts and Full Threaded Rods, full thread rods, bonnet bolts, Carriage Bolt in a variety of finishes and sizes from 1/2" to 3 1/2". In the petroleum and chemical industry the fully threaded stud is the most common ASTM F593 Bolt used for flanged connections. ASTM F593 Stud bolts are available in all thread pitches (UNC/UNRC – UNF/UNRF – 8UN) diameters and metric sizes. Hitesh Steel has the capability to thread and manufacture specials from round bar to the customers drawings.

ASTM F593 Hex Cap Screws- also known as machine bolts or hex bolts are available in various bolt grade markings and strengths. Our ASTM F593 Nut Bolts are used to attach machine threaded fasteners when joining materials together.

Many of the ASTM F593 Flange Bolts we manufacture for more critical high specification Superalloys. Whilst we manufacture many of the non-favoured thread forms such as BSW BSF UNC & UNF, we are finding the biggest call is now for Metric Hexagon Bolts that are modified versions of existing international standards or indeed custom bespoke bolting manufactured to Customer or OEM Drawings.

Is your requirement for a small ASTM F593 fastener or large machined fastener?  We will manufacture to your specifications and requirements.

Looking to buy Alloy 718 Bolts? Inconel 718 Bolts?

Check Today's price of Inconel 718 Bolts in India

Inconel 718 Bolts supplier

ASTM F593 Specification

ASTM F593 Bolt Type ASTM F593 Anchor Bolt, Carriage Bolt, Flange Bolt, 12 Point Bolt, Hex and Hex Flange Bolts, Hex Head Cap Screw, Place Bolt, Socket Head Cap Screws, Hanger Bolt, Hexagon Bolt / Tap Bolt, Lag Bolt, Machine Bolt, Plow Bolt, Shoulder Bolt, Square Head Bolt, Stud Bolt, T-Head Bolt, Toggle Bolt, U-Bolt
Inch #0000 -3" (customized sizes available)
Metric M1.6 - M48
Length Customized Length
Grade Non Ferrous, 12.9, 10.9, 9.8, 8.8, 5.8, 4.6, B7, 2, 5, 8, L9
Material Brass, Bronze / Copper Base Alloy, Copper, Molybdenum, Steel, Hardened Steel, Stainless Steel, Superalloy (Inconel, 718 Bolts, Hastelloy, Monel), Titanium, Exotic Metals, Other
Method Cold forming, Hot Forging, Wire Forming
Fastener Standards ASME / ANSI, BS, DIN, ISO, JIS, SAE, Other
Application Industries & uses Agriculture, Automotive, Construction and Infrastructure, Energy, Transportation
Testing Methods ASTM E38, E76 and E354, ASTM E53, E54, E62, E75and E478, ASTM E34, E101 and E227, ASTM E 120 and E1409.
Threads Configuration ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Thread Diameters M6 to M36
Certification Dual Certified As per ASTM & ASME Codes

Manufacturer of ASTM F593M Threaded Rods, ASTM F468 Hexagon Head Cap Bolts, ASTM F593M Bolts, ASTM F593 Socket Head Cap Screws, ASTM F593 Heavy Hex Bolts, ASTM F468M Screws, F468 Hexagon Head Screw, ASTM F468 Hex Head Bolts in Mumbai, India

1. Scope

1.1 ASTM F593 specification covers the requirements for stainless steel bolts, hex cap screws, and studs 0.25 to 1.50 in., inclusive, in nominal diameter in a number of alloys in common use and intended for service applications requiring general corrosion resistance.

1.2 Seven groups of stainless steel alloys are covered, including fourteen austenitic, two ferritic, four martensitic, and one precipitation hardening.

Group Alloys A Condition B
1  304, 305, 384, 304 L,    (CW) cold worked C
 18-9LW, 302HQ, 304J3D
2   316, 316 L    (CW) cold worked C
3   321, 347    (CW) cold worked C
4   430E    (CW) cold worked C
5   410F    (H) hardened and tempered
6   431    (H) hardened and tempered
7   630    (AH) age hardened

(A) Unless otherwise specified on the inquiry and order, the choice of an alloy from within a group shall be at the discretion of the fastener manufacturer (see 6.1).
(B) See 4.2 for options.
(C) Sizes 0.75 in. and larger may be hot worked and solution annealed, provided the bolts comply with the cold worked (CW) mechanical property requirements.
(D) When approved by the purchaser, Alloys 303, 303Se, or XM1 may be furnished.
(E) When approved by the purchaser, Alloy 430F may be furnished.
(F) When approved by the purchaser, Alloys 416 or 416Se may be furnished.

1.3 Supplementary requirements of an optional nature are provided, applicable only when agreed upon between the manufacturer and the purchaser at the time of the inquiry and order.

1.4 Suitable nuts for use with bolts, hex cap screws, and studs included in this specification are covered by Specification F594. Unless otherwise specified, all nuts used on these fasteners shall conform to the requirements of Specification F594, shall be of the same alloy group, and shall have a specified minimum proof stress equal to or greater than the specified minimum full-size tensile strength of the externally threaded fastener.

1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.6 ASTM F593 standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

astm.org

Group Alloy Grades Condition Family Type
1 304,305,384,304L,XM1,18-9LW, 302HQD Cold Worked ( CW ) Austenitic
2 316, 316 L Cold Worked ( CW ) Austenitic
3 321, 347 Cold Worked ( CW ) Austenitic
4 430E Cold Worked ( CW ) Ferritic
5 410F Hardened & Tempered ( H ) Martensitic
6 431 Hardened & Tempered ( H ) Martensitic
7 630 Age Hardened ( AH ) Precipitation Hardening

• Unless otherwise specified on the inquiry and order, the choice of an alloy from within a group shall be at the discretion of the fastener manufacturer
• Sizes 0.75 in. and larger may be hot worked and solution annealed.
• When approved by the purchaser, Alloys 303, 303Se, or XM1 may be furnished.
• When approved by the purchaser, Alloy 430F may be furnished.
• When approved by the purchaser, Alloys 416 or 416Se may be furnished.

ASTM F593 Bolts Chemical Properties

Element Group 1 ( AISI 304 ) Group 2 ( AISI 316 )
Carbon 0.08% 0.08%
Manganese, min 2.00% 2.00%
Phosphorus, max 0.045% 0.045%
Sulfur, max 0.030% 0.030%
Silicon 1.00% 1.00%
Chromium 18.0 to 20.0% 16.0 to 18.0%
Nickel 8.0 to 10.5% 10.0 to 14.0%
Copper 1.00%
Molybdenum 2.00 to 3.00%

ASTM F593 Bolts Mechanical Properties

Alloy Group Condition Marking Diameter Range Tensile, ksi Yield, ksi min Rockwell Hardness
1 AF F593A 1/4 to 1-1/2 65 to 85 20 B85 max
A F593B 1/4 to 1-1/2 75 to 100 30 B65 to 95
CW1 F593C 1/4 to 5/8 100 to 150 65 B95 to C32
CW2 F593D 3/4 to 1-1/2 85 to 140 45 B80 to C32
2 AF F593E 1/4 to 1-1/2 65 to 85 20 B85 max
A F593F 1/4 to 1-1/2 75 to 100 30 B65 to 95
CW1 F593G 1/4 to 5/8 100 to 150 65 B95 to C32
CW2 F593H 3/4 to 1-1/2 85 to 140 45 B80 to C32
BEST PRICE ! READY STOCK OF ASTM F593 / F593M BOLTS
  • ASTM F593 Bolts
  • ASTM F593 Non Ferrous Bolts
  • ASTM F593M Hex Bolts manufacturers
  • ASTM F593 Hex Head Bolts Supplier
  • ASTM F593 Square Bolts
  • ASTM F593M Bolts Exporter in India
  • ASTM SF593 Screws Price in India
  • F593 Hex Cap Screws Exporter in India
  • ASTM F593 Studs Supplier
  • ASTM F593 Socket Head Cap Screws Supplier
  • ASTM F593M Bolts Manufacturer
  • ASTM F593M Threaded Rods Exporter in India
  • ASTM F593 Heavy Hex Bolts Distributor
  • ASTM F593 Bolts Stockholder
  • F593 Hexagon Bolts
  • ASTM F593 Hex Head Bolts manufacturers
  • ASTM F593M Screws
  • F593 Hexagon Head Screw Manufacturer
  • ASTM F593 Hexagon Head Cap Bolts
  • ASTM F593 Studs

People also search for:

ASTM F593 Pdf, ASTM F593 Threaded Rod, F593 Bolt Strength, Best Quality ASTM F593 Bolts, ASTM F593 Bolts India, ASTM F593 Bolts Distributor Mumbai, Prime Quality ASTM F593 Bolts, Specialize In ASTM F593m Bolts, Astm Sf593 Bolts Prices In India, ASTM F593 Ss 304 Bolts, ASTM F593 Ss 316 Bolts, ASTM F593 Alloy 304 Bolts, ASTM F593 Alloy 305 Bolts, ASTM F593 Alloy 384 Bolts, ASTM F593 Alloy 304l Bolts, ASTM F593 Alloy XM1 Bolts, ASTM F593 Alloy 18-9LW Bolts, ASTM F593 Alloy 302HQD Bolts, ASTM F593 Alloy 316 Bolts, ASTM F593 Alloy 316l Bolts, ASTM F593 Alloy 321 Bolts, ASTM F593 Alloy 347 Bolts, ASTM F593 Alloy 430e Bolts, ASTM F593 Alloy 410f Bolts, ASTM F593 Alloy 431 Bolts, ASTM F593 Alloy 630 Bolts, ASTM F593 Aisi 304 Bolts, ASTM F593 Aisi 316 Bolts.

ASME SF593 Bolts stockist in India- ASME, DIN, AS, BS

ASTM F593 Bolts Coatings and plating as well as plain finished oil and tempered is available as required by the end user such as Zinc plating, Cadmium plating, Xylan ® coating, Dupont Teflon ® coating, Hot Dip Galvanized coating, Auge Antifrix ® coating, Sermagard ® coating and Niwat 1000 ® plating.

Teflon coated bolts

Available standard: DIN 934, ISO 4033, ISO 4032, DIN 935,DIN 936, ASME B18.2.2, ASME B18.2.4.6M, DIN 976, DIN 975, DIN 2510, DIN 939, DIN 940, DIN 938

PTFE coated bolts

Industries & Solutions

Contruction
Industrial
Shipbuilding
Nuclear

Pipe, Tube & Tubing

Sheet, Plate

Round Bar & fasteners


Trademark Notice

Specialized in Aircraft Materials & Aerospace Materials