Inconel 600 Pipe

Inconel 600 Pipe
Inconel 600 Pipe
Inconel 600 Welded Pipe
Inconel 600 Welded Pipe
Inconel 600 Seamless Pipe
Inconel 600 Seamless Pipe

Inconel 600 Pipe Specification

For gas service, better results can be obtained by using Alloy 600 Pipe well below this maximum hardness.

Pipe Material General Application Recommended Temperature Range
Inconel Alloy 600 Pipe Recommended for High Temperature Applications with Generally Corrosive Media - -205°F to 1200°F (-130°C to 650°C)

Material Type ASTM Pipe Specifications Condition Max. Recommended Hardness
Inconel Alloy 600 Pipe
Inconel 600 Pipe
600 ASTM B-167 Fully Annealed 90 Rb

Specifications ASTM B 167 ASME SB 167 / ASTM B 829 ASME SB 829 / ASTM B 517 ASME SB 517
Inconel 600 Seamless Pipe size 4 to 219mm W. T.: 0.5 to 20mm
Inconel 600 Welded Pipe size
5.0 mm – 1219.2 mm
Inconel 600 EFW Pipe size 5.0 mm – 1219.2 mm
Specialized in Large Diameter Size
Alloy 600 Pipe Schedule SCH5, SCH10, SCH40, STD, SCH80, SCH160
Inconel Alloy 600 Pipe Finish Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
Inconel 600 Pipe Form Round, Square, Hollow, Rectangular, Hydraulic, Straight Pipes Etc.
Alloy 600 Pipe Length Single Random, Double Random & Cut Length.
End Plain End, Beveled End, Treaded.
Marking All Inconel Alloy 600 Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
Material Test Certificates (MTC) Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
Manufacturers of Inconel 600 Pipe
  • Inconel 600 Pipe make Sumitomo Metals, Japan
  • Inconel 600 Pipe make Nippon Steel Corporation, Japan
  • Alloy 600 Pipe make Kobe Special Tube, Japan
  • Inconel 600 Pipe make Sanyo Special Steel, Japan
  • Inconel 600 Pipe make Tubacex Tubos Inoxidables S.A., Spain
  • Alloy 600 Pipe make Schoeller Bleckmann, Austria
  • Alloy 600 Seamless Pipe make Seah Steel Corporation, Korea
We can also cut, thread, and groove Inconel 600 Pipes to meet your specifications.
Types Out diameter Wall thickness Length
NB Sizes (in stock) 1/8” ~ 8” SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 Upto 6 Meters
Inconel 600 Seamless Pipe (Custom Sizes) 5.0mm ~ 203.2mm As per requirement Upto 6 Meters
Inconel 600 Welded Pipe (in Stock + Custom Sizes) 5.0mm ~ 1219.2mm 1.0 ~ 15.0 mm Upto 6 Meters

Types of Inconel 600 Seamless & Welded Pipe

  • Inconel 600 Hollow Pipe
  • Alloy 600 Seamless Pipe
  • Inconel 600 Bush Hex Pipe
  • Inconel 600 Round Pipe
  • 600 Inconel Alloy Round Pipe
  • 600 Custom Inconel Pipe
  • 600 Inconel Alloy Custom Pipe
  • 600 Inconel Thick Wall Pipe
  • Inconel Alloy 600 Thick Wall Pipe
  • SCH40 Inconel 600 pipe
  • Alloy 600 flex pipe
  • 600 Inconel Alloy Polished Pipe
  • Inconel 600 Thin Wall Pipe
  • Inconel Alloy 600 Thin Wall Pipe
  • ASTM B167 Inconel Seamless Pipe
  • Alloy 600 Welded Pipe
  • ASTM B167 Inconel Round Pipe
  • ASTM B167 Inconel Custom Pipe
  • ASTM B167 Inconel Thick Wall Pipe
  • ASTM B167 Inconel Thin Wall Pipe
  • Inconel 600 Round Pipe
  • UNS N06600 Inconel clad pipe
  • UNS N06600 Inconel welded pipe
  • UNS N06600 600 Inconel lined pipe

Value Added services:

Inconel 600 Pipe services

  • Hardness Test
  • Flattening Test
  • Pitting Resistance Test
  • Chemical Analysis – Spectro Analysis
  • Micro and MacroTest
  • Flaring Test
  • Intergranular Corrosion (IGC) Test
  • Mechanical Testing Such as Tensile of Area
  • Positive Material Identification – PMI Testing

ALLOY 600 Pipe Stock List

Alloy Product form Dimension
ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, annealed 1.5 x 0.25 mm
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, annealed 2.0 x 0.5 mm
ALLOY 600 (75 Ni/16 Cr) Pipe; seamless 3.0 x 0.4 mm
ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, seamless 3.0 x 0.5 mm
ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, seamless 4.0 x 0.25 mm
ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, annealed 4.0 x 0.5 mm
ALLOY 600 (75 Ni/16 Cr) Pipe; seamless, annealed 4.0 x 1.0 mm
ALLOY 600 (75 Ni/16 Cr) Pipe; seamless, cold drawn 4.5 x 0.5 mm
ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, annealed 5.0 x 0.5 mm
ALLOY 600 (75 Ni/16 Cr) Pipe; annealed, seamless 5.0 x 1.0 mm
ALLOY 600 (75 Ni/16 Cr) Pipe; seamless, hard drawn 5.0 x 1.0 mm
ALLOY 600 (75 Ni/16 Cr) Pipe; seamless, annealed 6.0 x 0.5 mm
NICKEL 600 (75 Ni/16 Cr) Pipe; on coil, seamless, annealed 6.0 x 1.0 mm
ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, annealed 6.0 x 1.0 mm
ALLOY 600 (75 Ni/16 Cr) Pipe; hard drawn, seamless 6.0 x 1.5 mm
ALLOY 600 (75 Ni/16 Cr) Pipe; seamless, annealed 6.35 x 1.63 mm (¼" x 0.064")
ALLOY 600 (75 Ni/16 Cr) Pipe; seamless, seamless, annealed 8.0 x 1.0 mm
ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, seamless 10.0 x 1.0 mm
ALLOY 600 (75 Ni/16 Cr) Pipe; seamless 10.0 x 2.0 mm
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, pickled 12.7 x 1.7 mm (½" x 0.065")
NICKEL 600 (75 Ni/16 Cr) Pipe; seamless, annealed 13.72 x 1.65 mm (¼"nb Sch10s)
NICKEL 600 (75 Ni/16 Cr) Pipe; seamless, cold drawn, pickled, annealed 14.0 x 3.0 mm
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, pickled 15.0 x 1.5 mm
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed 15.8 x 1.7 mm (5/8" x 0.065")
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, pickled 18.0 x 2.0 mm
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, pickled, annealed 21.34 x 1.65 mm (½"nb Sch5)
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, pickled, annealed 21.34 x 2.11 mm (½"nb Sch10s)
ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, pickled 21.34 x 2.77 mm (½"nb sch40s)
ALLOY 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, pickled, seamless 25.4 x 1.65 mm (1" x 0.065")
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, annealed, pickled 26.67 x 2.11 mm (¾"nb Sch10s)
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, pickled 26.67 x 2.87 mm (¾"nb sch40s)
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, pickled, annealed 26.67 x 3.91 mm (¾"nb Sch80s)
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, annealed, pickled 30.0 x 2.5 mm
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, pickled, annealed 33.4 x 2.77 mm (1"nb Sch10s)
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, annealed, pickled 33.4 x 3.38 mm (1"nb Sch40s)
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, pickled, annealed 33.4 x 4.55 mm (1"nb Sch80s)
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, pickled, annealed 42.16 x 1.65 mm (1¼"nb sch5s)
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, seamless, annealed, pickled 42.16 x 3.56 mm (1¼"nb Sch40s)
ALLOY 600 (75 Ni/16 Cr) Pipe; cold finished, seamless, annealed 48.26 x 2.77 mm (1½"nb Sch10s)
ALLOY 600 (75 Ni/16 Cr) Pipe; cold finished, seamless, annealed 48.26 x 3.68 mm (1½"nb Sch40s)
NICKEL 600 (75 Ni/16 Cr) Pipe; seamless, cold drawn, annealed, pickled 53.5 x 3.0 mm
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, pickled, annealed 60.33 x 2.77 mm (2"nb sch10s)
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, pickled, annealed 60.33 x 3.91 mm (2"nb sch40s)
NICKEL 600 (75 Ni/16 Cr) Pipe; seamless, cold drawn, pickled, annealed 66.0 x 4.0 mm
NICKEL 600 (75 Ni/16 Cr) Pipe; seamless, cold drawn, pickled, annealed 76.2 x 3.3 mm
NICKEL 600 (75 Ni/16 Cr) Pipe; seamless, cold drawn, pickled, annealed 88.9 x 3.05 mm (3"nb sch10s)
NICKEL 600 (75 Ni/16 Cr) Pipe; seamless, cold drawn, pickled, annealed 88.9 x 5.49 mm (3"nb sch40s)
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, pickled, annealed 114.3 x 3.05 mm (4"nb sch10s)
NICKEL 600 (75 Ni/16 Cr) Pipe; cold drawn, pickled, annealed 114.3 x 6.02 mm (4"nb sch40s)
NICKEL 600 (75 Ni/16 Cr) Pipe; extruded, pickled, annealed 141.3 x 6.55 mm (5"nb sch40s)
NICKEL 600 (75 Ni/16 Cr) Pipe; extruded, pickled, annealed 153.0 x 6.5 mm
NICKEL 600 (75 Ni/16 Cr) Pipe; seamless, extruded, pickled, annealed 168.28 x 7.11 mm (6"nb sch40s)

Alloy 600 Pipes Stock List

Standard lengths of 2000 mm up to 6000 mm. Cut to size on request (tolerance +2/-0 mm).

5.00 mm x 0.50 mm
5.00 mm x 1.00 mm
6.00 mm x 0.50 mm
6.00 mm x 1.00 mm
8.00 mm x 1.00 mm
8.00 mm x 1.50 mm
10.00 mm x 1.00 mm
10.00 mm x 1.50 mm
10.00 mm x 2.00 mm
12.00 mm x 1.00 mm
12.00 mm x 1.50 mm
12.00 mm x 2.00 mm
13.72 mm x 1.65 mm 1/4" NB SCH 10
13.72 mm x 2.24 mm 1/4" NB SCH 40
14.00 mm x 2.00 mm
15.00 mm x 1.50 mm
17.10 mm x 1.65 mm 3/8" NB SCH 10
17.10 mm x 2.31 mm 3/8" NB SCH 40
18.00 mm x 2.00 mm
20.00 mm x 2.00 mm
21.34 mm x 2.11 mm 1/2" NB SCH 10
21.34 mm x 2.77 mm 1/2" NB SCH 40
21.34 mm x 3.73 mm 1/2" NB SCH 80
22.00 mm x 1.00 mm
22.00 mm x 2.00 mm
24.00 mm x 2.00 mm
24.00 mm x 4.00 mm
25.00 mm x 2.00 mm
25.40 mm x 1.65 mm
25.40 mm x 2.11 mm
25.40 mm x 2.77 mm
26.67 mm x 1.65 mm 3/4" NB SCH 5
26.67 mm x 2.11 mm 3/4" NB SCH 10
26.67 mm x 2.87 mm 3/4" NB SCH 40
26.67 mm x 3.91 mm 3/4" NB SCH 80
30.00 mm x 2.50 mm
33.40 mm x 1.65 mm
33.40 mm x 2.77 mm 1" NB SCH 10
33.40 mm x 3.38 mm 1" NB SCH 40
33.40 mm x 4.55 mm 1" NB SCH 80
36.00 mm x 3.00 mm
40.00 mm x 2.50 mm
42.16 mm x 2.77 mm 1 1/4" NB SCH 10
42.16 mm x 3.56 mm 1 1/4" NB SCH 40
48.26 mm x 1.65 mm 1 1/2" NB SCH 5
48.26 mm x 2.77 mm 1 1/2" NB SCH 10
48.26 mm x 3.68 mm 1 1/2" NB SCH 40
48.26 mm x 5.08 mm 1 1/2" NB SCH 80
50.00 mm x 2.50 mm
60.32 mm x 2.77 mm 2" NB SCH 10
60.32 mm x 3.91 mm 2" NB SCH 40
60.32 mm x 5.54 mm 2" NB SCH 80
66.00 mm x 4.00 mm
73.02 mm x 3.05 mm 2 1/2" NB SCH 10
73.02 mm x 5.16 mm 2 1/2" NB SCH 40
76.10 mm x 3.20 mm
88.90 mm x 3.05 mm 3" NB SCH 10
88.90 mm x 5.49 mm 3" NB SCH 40
88.90 mm x 7.62 mm 3" NB SCH 80
101.60 mm x 3.05 mm
114.30 mm x 3.05 mm 4" NB SCH 10
114.30 mm x 6.02 mm 4" NB SCH 40
114.30 mm x 8.56 mm
141.30 mm x 3.40 mm
168.30 mm x 3.40 mm
168.30 mm x 7.11 mm 6" NB SCH 40
219.10 mm x 3.76 mm
219.10 mm x 8.18 mm

Inconel 600 Pipe Stock

Inconel 600 Seamless Pipe
Inconel 600 Seamless Pipe
Inconel 600 Welded Pipe
Inconel 600 Welded Pipe
Inconel 600 Exhaust Pipe
Inconel 600 Exhaust Pipe
Inconel 600 Pipe material
Inconel 600 Pipe material
Inconel 600 Weld Pipe
Inconel 600 Weld Pipe
Inconel 600 Lined Pipe
Inconel 600 Lined Pipe
Inconel 600 Square Pipe
Inconel 600 Square Pipe
Inconel 600 Clad Pipe
Inconel 600 Clad Pipe
Inconel 600 Flex Pipe
Inconel 600 Flex Pipe

Inconel 600 Pipe Pressure Rating

Inconel 600 Pipe pressure rating

American standard for Process piping (ASME B31.3 : 2012)

Selected wall tolerance: ±10%
OUTSIDE DIAMETER AND WALL THICKNESS (MM): 1.59 x 0.36

Grade
Maximum internal pressure, ksi
  100°F 200°F 300°F 400°F 500°F 600°F 700°F Comments
N06600 :1 8.02 8.02 8.02 8.02 8.02 8.02 8.02 B167 OD>5" and hotworked
N06600 :2 9.6 9.6 9.6 9.6 9.6 9.6 9.6 B167 OD<=5" and hotworked + OD>5" and coldworked
N06600 :3 11.19 11.19 11.19 11.19 11.19 11.19 11.19 B167 OD<=5" and coldworked

Selected wall tolerance: ±10%
OUTSIDE DIAMETER AND WALL THICKNESS (MM): 6 x 1

Grade
Maximum internal pressure, ksi
  100°F 200°F 300°F 400°F 500°F 600°F 700°F Comments
N06600 :1 392 392 392 392 392 392 392 B167 OD>5" and hotworked
N06600 :2 470 470 470 470 470 470 470 B167 OD<=5" and hotworked + OD>5" and coldworked
N06600 :3 547 547 547 547 547 547 547 B167 OD<=5" and coldworked

Selected wall tolerance: ±10%
OUTSIDE DIAMETER AND WALL THICKNESS (MM): 8 x 1

Grade
Maximum internal pressure, ksi
  100°F 200°F 300°F 400°F 500°F 600°F 700°F Comments
N06600 :1 284 284 284 284 284 284 284 B167 OD>5" and hotworked
N06600 :2 340 340 340 340 340 340 340 B167 OD<=5" and hotworked + OD>5" and coldworked
N06600 :3 397 397 397 397 397 397 397 B167 OD<=5" and coldworked

Disclaimer: The pressures suggested in this table are given only as guidance. Dimensioning of piping systems is also depending on other factors like external forces, thermal stresses, dead weight etc. Furthermore the design must be made according to regulations from local authorities and approved accordingly.

For Pipes in pressure vessels and boilers it is important to consider standards like:

  • American standard ASME Boiler and Pressure Vessel Code Section VIII Division 1 and 2.
  • Pressure Equipment Directive 97/23/PG (PED)
  • Machine Directive 2006/42/EG for European applications

Inconel 600 Pipe Welding Tips

Inconel 600 Pipe is a nickel-chromium alloys which is used in different welding processes. Inconel 600 Pipe is most commonly used in techniques where high heat tolerance is required. Welding Inconel can be rather difficult because the welds that are created have a tendency to crack. There are a few alloys of Inconel that were specifically designed for use in welding like TIG.

Inconel 600 Pipe composition & technical information

Inconel 600 Pipe Yield Strength

Inconel Alloy 600 Pipe Chemical Composition

Grade C Mn Si Fe S Cr Cu Ni
Inconel 600 Pipe min. 6.0 14.0 72.0
max. 0.15 1.0 0.5 10.0 0.015 17.0 0.5

Inconel 600 Pipe Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
Inconel 600 Pipe Psi – 95,000 , MPa -655 Psi – 45,000 , MPa – 310 40

Equivalent Grades for Inconel 600 Seamless and Welded Pipes

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 600 Pipe N06600 NA 13 NiCr15Fe 2.4816 NC15FE11M МНЖМц 28-2,5-1,5 NCF 600

Inconel Alloy 600 Pipe Weldability of materials

Table 1: Filler selection for nickel alloys

Parent Alloy Filler designations Comments
Alloy BS EN ISO 18274 AWS A5.14 Trade names
Pure nickel        
Nickel 200 Ni 2061 ERNi-1 Nickel 61 Matching filler metal normally contains 3%Ti
Nickel Copper        
Alloy 400 Ni 4060 ERNiCu-7 Monel 60 Matching filler metal contains additions of Mn, Ti and Al
Nickel Chromium        
Brightray S Ni 6076 - NC 80/20 Ni-Cr and Ni-Cr-Fe filler metals may be used
Nimonic 75 Ni 6076 - NC 80/20
Nickel-Chromium-Iron        
Alloy 800 Ni 6625 ERNiCrMo-3 Inconel 625
Thermanit 21/33
Usually welded with Ni-Cr-X alloys, but more nearly matching consumables are available which contain higher C and also Nb
Alloy 600 Ni 6082 ERNiCr-3 Inconel 82 Matching filler metal contains Nb addition
Alloy 718 Ni 7718 ERNiFeCr-2 Inconel 718 Matching filler metal is normally used but Alloy 625 is an alternative consumable , if postweld heat treatment is not applied
Nickel-Chromium-Molybdenum        
Alloy 625 Ni 6625 ERNiCrMo-3 Inconel 625 Filler metal is also used widely for cladding and dissimilar welds
Hastelloy C-22 Ni 6022 ERNiCrMo-10 Hastelloy C-22  
Nickel-Molybdenum        
Hastelloy B-2 Ni 1066 ERNiMo-7 Hastelloy B-2 Corrosion resistant alloys require matching fillers

Inconel 600 Pipe Price

PRODUCT NAME PACK QTY PRICE
Alloy 600 1/4"(13.72mm) NB x Sch 10/10s(1.65mm) wall x500mm 1
£80.00
Alloy 600 1/4"(13.72mm) NB x Sch 10/10s(1.65mm) wall x500mm 5
£230.00
Alloy 600 1/4"(13.72mm) NB x Sch 10/10s(1.65mm) wall x1000mm 1
£101.00