Inconel 600 Tube

Inconel 600 Tube supplier
Inconel 600 Tube
Inconel 600 Seamless Tube Stockist
Inconel 600 Seamless Tube
Inconel 600 Tubing For Sale
Inconel 600 Tubing
Table of contents

Inconel 600 Tube Specification

Specifications ASTM B163, B516 / ASME SB163, B516
Alloy 600 Tubes Size 15 NB to 150 NB IN
ASTM B163 UNS N06600 Tubing Wall Thickness .035" -.095', (special wall thicknesses available)
Specialized in Large Diameter Size
SB 163 UNS N06600 Tubing Type Seamless / ERW / Welded / Fabricated / Hollow
2.4816 Inconel 600 Tubes Schedule SCH5, SCH10, SCH40, STD, SCH80, SCH160
Inconel 2.4816 Tubes Condition Hot-Finished, Annealed, Cold-Drawn, Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
ASTM B163 N06600 Tubes Form Round, Square, U-Tube, Rectangular, Heat-Exchanger, Hydraulic, Boiler, Straight, Condenser, Capillary, Coiled
Nickel Alloy 600 Tubes Length Single Random, Double Random & Cut Length.
End Plain End, Beveled End, Treaded.
Marking All 2.4816 Alloy 600 Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
Material Test Certificates (MTC) Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
Inconel 600 Tube manufacturers
  • Sumitomo Metals, Japan
  • Nippon Steel Corporation, Japan
  • Kobe Special Tube, Japan
  • Sanyo Special Steel, Japan
  • Tubacex Tubos Inoxidables S.A., Spain
  • Schoeller Bleckmann, Austria
  • Seah Steel Corporation, Korea
We can also cut, thread, and groove ASTM B163 UNS N06600 Tubes to meet your specifications.

Alloy 600 Seamless Tube

Outside diameter Wall thickness Length
5.0 ~ 203.2mm As per requirement Upto 6 Meters

ASTM B163 UNS N06600 Welded Tube

Outside diameter Wall thickness Length
5.0 ~ 1219.2mm 1.0 ~ 15.0 mm Upto 6 Meters

Stock List

ALLOY 600 (75 Ni/16 Cr) Dimension (mm)
cold drawn, seamless, annealed 1.5 x 0.25
cold drawn, seamless, annealed 2.0 x 0.5
seamless 3.0 x 0.4
cold drawn, annealed, seamless 3.0 x 0.5
cold drawn, annealed, seamless 4.0 x 0.25
cold drawn, seamless, annealed 4.0 x 0.5
seamless, annealed 4.0 x 1.0
seamless, cold drawn 4.5 x 0.5
cold drawn, seamless, annealed 5.0 x 0.5
annealed, seamless 5.0 x 1.0
seamless, hard drawn 5.0 x 1.0
seamless, annealed 6.0 x 0.5
on coil, seamless, annealed 6.0 x 1.0
cold drawn, seamless, annealed 6.0 x 1.0
hard drawn, seamless 6.0 x 1.5
seamless, annealed 6.35 x 1.63 (¼" x 0.064")
seamless, seamless, annealed 8.0 x 1.0
cold drawn, annealed, seamless 10.0 x 1.0
seamless 10.0 x 2.0
cold drawn, annealed, pickled 12.7 x 1.7 (½" x 0.065")
seamless, annealed 13.72 x 1.65 (¼"nb Sch10s)
seamless, cold drawn, pickled, annealed 14.0 x 3.0
cold drawn, annealed, pickled 15.0 x 1.5
cold drawn, annealed 15.8 x 1.7 (5/8" x 0.065")
cold drawn, annealed, pickled 18.0 x 2.0
cold drawn, pickled, annealed 21.34 x 1.65 (½"nb Sch5)
cold drawn, pickled, annealed 21.34 x 2.11 (½"nb Sch10s)
cold drawn, annealed, pickled 21.34 x 2.77 (½"nb sch40s)
cold drawn, annealed, pickled, seamless 25.4 x 1.65 (1" x 0.065")
cold drawn, seamless, annealed, pickled 26.67 x 2.11 (¾"nb Sch10s)
cold drawn, annealed, pickled 26.67 x 2.87 (¾"nb sch40s)
cold drawn, pickled, annealed 26.67 x 3.91 (¾"nb Sch80s)
cold drawn, annealed, pickled 30.0 x 2.5
cold drawn, seamless, pickled, annealed 33.4 x 2.77 (1"nb Sch10s)
cold drawn, seamless, annealed, pickled 33.4 x 3.38 (1"nb Sch40s)
cold drawn, pickled, annealed 33.4 x 4.55 (1"nb Sch80s)
cold drawn, seamless, pickled, annealed 42.16 x 1.65 (1¼"nb sch5s)
cold drawn, seamless, annealed, pickled 42.16 x 3.56 (1¼"nb Sch40s)
cold finished, seamless, annealed 48.26 x 2.77 (1½"nb Sch10s)
cold finished, seamless, annealed 48.26 x 3.68 (1½"nb Sch40s)
seamless, cold drawn, annealed, pickled 53.5 x 3.0
cold drawn, pickled, annealed 60.33 x 2.77 (2"nb sch10s)
cold drawn, pickled, annealed 60.33 x 3.91 (2"nb sch40s)
seamless, cold drawn, pickled, annealed 66.0 x 4.0
seamless, cold drawn, pickled, annealed 76.2 x 3.3
seamless, cold drawn, pickled, annealed 88.9 x 3.05 (3"nb sch10s)
seamless, cold drawn, pickled, annealed 88.9 x 5.49 (3"nb sch40s)
cold drawn, pickled, annealed 114.3 x 3.05 (4"nb sch10s)
cold drawn, pickled, annealed 114.3 x 6.02 (4"nb sch40s)
extruded, pickled, annealed 141.3 x 6.55 (5"nb sch40s)
extruded, pickled, annealed 153.0 x 6.5
seamless, extruded, pickled, annealed 168.28 x 7.11 (6"nb sch40s)

Value Added services:

Inconel 600 Tube services

For gas service, better results can be obtained by using Alloy 600 Tubing well below this maximum hardness.

Tubing Material General Application Recommended Temperature Range
Inconel Alloy 600 Tubing Recommended for High Temperature Applications with Generally Corrosive Media - -205°F to 1200°F (-130°C to 650°C)

Material Type ASTM Tubing Specifications Condition Max. Recommended Hardness
Inconel Alloy 600 Tube
Inconel 600 Tubing		 600 ASTM B-167 Fully Annealed 90 Rb

SB 163 UNS N06600 Tube Types

Inconel 600 Gas Tube Ar 15 supplier
Inconel 600 Gas Tube Ar 15
Alloy 600 Bourdon Tube Stockist
Alloy 600 Bourdon Tube
ASTM B163 UNS N06600 Capillary Tube
ASTM B163 UNS N06600 Capillary Tube
SB 163 UNS N06600 Furnace Tube
SB 163 UNS N06600 Furnace Tube
2.4816 Inconel 600 Gas Tube
2.4816 Inconel 600 Gas Tube
Inconel 2.4816 Heat Exchanger Tubes
Inconel 2.4816 Heat Exchanger Tubes
ASTM B163 N06600 Mortar Tube
ASTM B163 N06600 Mortar Tube
Nickel Alloy 600 Radiant Tube
Nickel Alloy 600 Radiant Tube
2.4816 Alloy 600 Square Tube
2.4816 Alloy 600 Square Tube

Inconel 600 Tube Pressure Rating

American standard for Process piping (ASME B31.3 : 2012)

Selected wall tolerance: ±10%
OUTSIDE DIAMETER AND WALL THICKNESS (MM): 1.59 x 0.36

Grade
Maximum internal pressure, ksi
  100°F 200°F 300°F 400°F 500°F 600°F 700°F Comments
N06600 :1 8.02 8.02 8.02 8.02 8.02 8.02 8.02 B167 OD>5" and hotworked
N06600 :2 9.6 9.6 9.6 9.6 9.6 9.6 9.6 B167 OD<=5" and hotworked + OD>5" and coldworked
N06600 :3 11.19 11.19 11.19 11.19 11.19 11.19 11.19 B167 OD<=5" and coldworked

Selected wall tolerance: ±10%
OUTSIDE DIAMETER AND WALL THICKNESS (MM): 6 x 1

Grade
Maximum internal pressure, ksi
  100°F 200°F 300°F 400°F 500°F 600°F 700°F Comments
N06600 :1 392 392 392 392 392 392 392 B167 OD>5" and hotworked
N06600 :2 470 470 470 470 470 470 470 B167 OD<=5" and hotworked + OD>5" and coldworked
N06600 :3 547 547 547 547 547 547 547 B167 OD<=5" and coldworked

Selected wall tolerance: ±10%
OUTSIDE DIAMETER AND WALL THICKNESS (MM): 8 x 1

Grade
Maximum internal pressure, ksi
  100°F 200°F 300°F 400°F 500°F 600°F 700°F Comments
N06600 :1 284 284 284 284 284 284 284 B167 OD>5" and hotworked
N06600 :2 340 340 340 340 340 340 340 B167 OD<=5" and hotworked + OD>5" and coldworked
N06600 :3 397 397 397 397 397 397 397 B167 OD<=5" and coldworked

Disclaimer: The pressures suggested in this table are given only as guidance. Dimensioning of piping systems is also depending on other factors like external forces, thermal stresses, dead weight etc. Furthermore the design must be made according to regulations from local authorities and approved accordingly.

For tubes in pressure vessels and boilers it is important to consider standards like:

  • American standard ASME Boiler and Pressure Vessel Code Section VIII Division 1 and 2.
  • Pressure Equipment Directive 97/23/PG (PED)
  • Machine Directive 2006/42/EG for European applications

2.4816 Inconel 600 Tube Nominal Tube Wall Thickness & Dimensions

Alloy 600 Tubes
(O.D.)		 ASTM B163 UNS N06600 Tube Gauge
BWG 00 BWG 0 BWG 1 BWG 2 BWG 3 BWG 4 BWG 5 BWG 6 BWG 7 BWG 8 BWG 9 BWG 10 BWG 11 BWG 12 BWG 13 BWG 14 BWG 15 BWG 16 BWG 17 BWG 18 BWG 19 BWG 20 BWG 21 BWG 22 BWG 23 BWG 24
Inconel 600 Tubing Wall Thickness (Inches)
0.380 0.340 0.300 0.284 0.259 0.238 0.220 0.203 0.180 0.165 0.148 0.134 0.120 0.109 0.095 0.083 0.072 0.065 0.058 0.049 0.042 0.035 0.032 0.028 0.025 0.022
SB 163 UNS N06600 Tubes Inside Dia
1/4"  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A 0.010 0.032 0.060 0.084 0.106 0.120 0.134 0.152 0.166 0.180 0.186 0.194 0.200 0.206
3/8"  N/A  N/A  N/A  N/A  N/A  N/A  N/A  N/A 0.015 0.045 0.079 0.107 0.135 0.157 0.185 0.209 0.231 0.245 0.259 0.277 0.291 0.305 0.311 0.319 0.325 0.331
1/2"  N/A  N/A  N/A  N/A  N/A 0.024 0.060 0.094 0.140 0.170 0.204 0.232 0.260 0.282 0.310 0.334 0.356 0.370 0.384 0.402 0.416 0.430 0.436 0.444 0.450 0.456
5/8"  N/A  N/A 0.025 0.057 0.107 0.149 0.185 0.219 0.265 0.295 0.329 0.357 0.385 0.407 0.435 0.459 0.481 0.495 0.509 0.527 0.541 0.555 0.561 0.569 0.575 0.581
3/4"  N/A 0.070 0.150 0.182 0.232 0.274 0.310 0.344 0.390 0.420 0.454 0.482 0.510 0.532 0.560 0.584 0.606 0.620 0.634 0.652 0.666 0.680 0.686 0.694 0.700 0.706
7/8" 0.115 0.195 0.275 0.307 0.357 0.399 0.435 0.469 0.515 0.545 0.579 0.607 0.635 0.657 0.685 0.709 0.731 0.745 0.759 0.777 0.791 0.805 0.811 0.819 0.825 0.831
1" 0.240 0.320 0.400 0.432 0.482 0.524 0.560 0.594 0.640 0.670 0.704 0.732 0.760 0.782 0.810 0.834 0.856 0.870 0.884 0.902 0.916 0.930 0.936 0.944 0.950 0.956
1 1/8" 0.365 0.445 0.525 0.557 0.607 0.649 0.685 0.719 0.765 0.795 0.829 0.857 0.885 0.907 0.935 0.959 0.981 0.995 1.009 1.027 1.041 1.055 1.061 1.069 1.075 1.081
1 1/4" 0.490 0.570 0.650 0.682 0.732 0.774 0.810 0.844 0.890 0.920 0.954 0.982 1.010 1.032 1.060 1.084 1.106 1.120 1.134 1.152 1.166 1.180 1.186 1.194 1.200 1.206
1 1/2" 0.740 0.820 0.900 0.932 0.982 1.024 1.060 1.094 1.140 1.170 1.204 1.232 1.260 1.282 1.310 1.334 1.356 1.370 1.384 1.402 1.416 1.430 1.436 1.444 1.450 1.456
1 3/4" 0.990 1.070 1.150 1.182 1.232 1.274 1.310 1.344 1.390 1.420 1.454 1.482 1.510 1.532 1.560 1.584 1.606 1.620 1.634 1.652 1.666 1.680 1.686 1.694 1.700 1.706
2" 1.240 1.320 1.400 1.432 1.482 1.524 1.560 1.594 1.640 1.670 1.704 1.732 1.760 1.782 1.810 1.834 1.856 1.870 1.884 1.902 1.916 1.930 1.936 1.944 1.950 1.956
2 1/4" 1.490 1.570 1.650 1.682 1.732 1.774 1.810 1.844 1.890 1.920 1.954 1.982 2.010 2.032 2.060 2.084 2.106 2.120 2.134 2.152 2.166 2.180 2.186 2.194 2.200 2.206
2 1/2" 1.740 1.820 1.900 1.932 1.982 2.024 2.060 2.094 2.140 2.170 2.204 2.232 2.260 2.282 2.310 2.334 2.356 2.370 2.384 2.402 2.416 2.430 2.436 2.444 2.450 2.456
2 3/4" 1.990 2.070 2.150 2.182 2.232 2.274 2.310 2.344 2.390 2.420 2.454 2.482 2.510 2.532 2.560 2.584 2.606 2.620 2.634 2.652 2.666 2.680 2.686 2.694 2.700 2.706
3" 2.240 2.320 2.400 2.432 2.482 2.524 2.560 2.594 2.640 2.670 2.704 2.732 2.760 2.782 2.810 2.834 2.856 2.870 2.884 2.902 2.916 2.930 2.936 2.944 2.950 2.956
3 1/4" 2.490 2.570 2.650 2.682 2.732 2.774 2.810 2.844 2.890 2.920 2.954 2.982 3.010 3.032 3.060 3.084 3.106 3.120 3.134 3.152 3.166 3.180 3.186 3.194 3.200 3.206
3 1/2" 2.740 2.820 2.900 2.932 2.982 3.024 3.060 3.094 3.140 3.170 3.204 3.232 3.260 3.282 3.310 3.334 3.356 3.370 3.384 3.402 3.416 3.430 3.436 3.444 3.450 3.456
3 3/4" 2.990 3.070 3.150 3.182 3.232 3.274 3.310 3.344 3.390 3.420 3.454 3.482 3.510 3.532 3.560 3.584 3.606 3.620 3.634 3.652 3.666 3.680 3.686 3.694 3.700 3.706
4" 3.240 3.320 3.400 3.432 3.482 3.524 3.560 3.594 3.640 3.670 3.704 3.732 3.760 3.782 3.810 3.834 3.856 3.870 3.884 3.902 3.916 3.930 3.936 3.944 3.950 3.956
4 1/4" 3.490 3.570 3.650 3.682 3.732 3.774 3.810 3.844 3.890 3.920 3.954 3.982 4.010 4.032 4.060 4.084 4.106 4.120 4.134 4.152 4.166 4.180 4.186 4.194 4.200 4.206
4 1/2" 3.740 3.820 3.900 3.932 3.982 4.024 4.060 4.094 4.140 4.170 4.204 4.232 4.260 4.282 4.310 4.334 4.356 4.370 4.384 4.402 4.416 4.430 4.436 4.444 4.450 4.456
4 3/4" 3.990 4.070 4.150 4.182 4.232 4.274 4.310 4.344 4.390 4.420 4.454 4.482 4.510 4.532 4.560 4.584 4.606 4.620 4.634 4.652 4.666 4.680 4.686 4.694 4.700 4.706
5" 4.240 4.320 4.400 4.432 4.482 4.524 4.560 4.594 4.640 4.670 4.704 4.732 4.760 4.782 4.810 4.834 4.856 4.870 4.884 4.902 4.916 4.930 4.936 4.944 4.950 4.956
5 1/4" 4.490 4.570 4.650 4.682 4.732 4.774 4.810 4.844 4.890 4.920 4.954 4.982 5.010 5.032 5.060 5.084 5.106 5.120 5.134 5.152 5.166 5.180 5.186 5.194 5.200 5.206

Inconel 2.4816 Hydraulic Tube Burst Pressure

(Barlow’s Formula)

P = (2ST÷D) (45,000 PSI Min Tensile Stress)
P = Burst Pressure
S = 45,000 lbs. PSI Tensile Strength
T = Nominal Wall Thickness
D = OD/ Outside Diameter

1/4" x 0.035 - 12,600 5/8" x 0.083 - 11,950 1-1/8" x 0.065 - 5,200
1/4 x 0.049 - 17,640 3/4 x 0.035 - 4,200 1-1/8" x 0.083 - 6,640
5/16" x 0.035 - 10,080 3/4" x 0.049 - 5,880 1-1/8 x 0.95 - 7,600
5/16 x 0.049 - 14,110 3/4 x 0.065 - 7,800 1-1/8 x 0.109 - 8,720
3/8" x 0.035 - 8,400 3/4" x 0.083 - 9,960 1-1/4" x 0.065 - 4,680
3/8 x 0.049 - 11,760 3/4 x 0.095 - 11,400 1-1/4 x 0.083 - 5,975
3/8" x 0.065 - 15,600 3/4" x 0.109 - 13,080 1-1/4 x 0.095 - 6,840
7/16 x 0.035 - 7,200 7/8 x 0.049 - 5,040 1-1/4" x 0.109 - 7,848
7/16" x 0.049 - 10,080 7/8" x 0.065 - 6,685 1-1/4 x 0.120 - 8,640
7/16 x 0.065 - 13,370 7/8 x 0.083 - 8,535 1-1/2" x 0.083 - 4,980
1/2" x 0.035 -  6,300 7/8" x 0.095 - 9,770 1-1/2 x 0.095 - 5,700
1/2 x 0.049 -  8,820 1" x 0.049 - 4,410 1-1/2" x 0.109 - 6,540
1/2" x 0.065 - 11,700 1" x 0.065 - 5,850 1-1/2 x 0.120 - 7,200
5/8 x 0.035 -  5,040 1" x 0.083 - 7,470 2" x 0.134 - 6,030
5/8" x 0.049 -  7,055 1" x 0.095 - 8,550 2" x 0.188 - 8,460
5/8 x 0.065 -  9,360

Note: To compute safe working pressures, above Burst Pressures should be divided by your desired safety factor.

ASTM B163 N06600 Tubing Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Inconel 600 0.15 max 1.00 max 0.50 max 0.015max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00

Nickel Alloy 600 Tubes Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 600 8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %

2.4816 Alloy 600 Tube Equivalent Grades

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 600 2.4816 N06600 NCF 600 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NiCr15Fe

Alloy 600 UNS N06600 Seamless Tube Price in India

PRODUCT NAME PACK QTY PRICE
1/4"(13.72) NBxSch10/10s(1.65) wall x500 1
£80.00
1/4"(13.72) NBxSch10/10s(1.65) wall x500 2
£124.00
1/4"(13.72) NBxSch10/10s(1.65) wall x500 3
£164.00
1/4"(13.72) NBxSch10/10s(1.65) wall x500 4
£200.00