Inconel Supplier

Inconel Stockist in India, Inconel Material Price, Inconel Price Per Kg

Check Inconel Density, Inconel Ductility, Inconel Electrical Conductivity, Inconel Galvanic Corrosion, Inconel Hardness, Inconel Heat Treatment, Inconel Heat Shield, Inconel Heat Resistance, Inconel Material Specification, Inconel Machinability, Inconel Material Properties, Inconel Rockwell Hardness, Inconel Strength, Inconel Thermal Conductivity & lots more.

Inconel® is a registered trademark (of Special Metals Corporation) referring to a family of austenitic nickel-chromium super alloys.

Inconel is a family of austenitic nickel-chromium-based superalloys or special steel. Inconel alloys are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack.

Inconel Nickel Alloy retains strength over a wide temperature range, attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel’s high temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy. INCONEL alloy 625 retains its excellent ductility and toughness at low temperature.Inconel Heat Resistance performance characteristics such as tensile strength, impact resistance, and corrosion resistance can degrade when the metal has been heated to a high temperature.

Inconel alloys are typically used in high temperature applications.

Inconel alloys / Inconel Alloy Material / Inconel Grades / Inconel Types

Hitesh Steel is Aircraft Materials, Inconel Material Grades and Inconel supplier in India. Alloys of inconel include below Inconel Material, click on below for Inconel Material Price, Inconel Price, Inconel Price Per Kg & Inconel Material Cost:

Inconel Material Specification

  • Inconel 600
    Solid solution strengthened.
  • Inconel 601
  • Inconel 625
    Acid resistant, good weldability. The LCF version is typically used in bellows. Ideal for hardware and components in the power, aerospace and chemical processing industries. Offered in sheet, plate, bar and forgings.
  • Inconel 690
    Low cobalt content for nuclear applications, and low resistivity.
  • Inconel 713C
    Precipitation hardenable nickel-chromium base cast alloy.
  • Inconel 718
    Gamma double prime strengthened with good weldability. The preferred material for cryogenic storage tanks, turbines, downhole shafts and wellhead parts offered in sheet, plate and bar.
  • Inconel 751
    Increased aluminium content for improved rupture strength in the 1600 °F range.
  • Inconel 792
    Increased aluminium content for improved high temperature corrosion properties, used especially in gas turbines.
  • Inconel 939
    Gamma prime strengthened to increase weldability.
  • Inconel 188
    Readily fabricated for commercial gas turbine and aerospace applications. Offered in sheet, plate and bar.
  • Inconel X-750
    Commonly used for gas turbine components, including blades, seals and rotors.
  • Inconel 230
    Inconel 230 Plate & Sheet mainly used by the power, aerospace, chemical processing and industrial heating industries, Aerospace Materials.
  • Inconel 907
  • Inconel 909
  • Inconel 706
  • Inconel 617

Inconel density & Inconel Properties

Inconel Tensile Strength

  Physical Properties Metric English
Inconel Alloy 600 Density 8.47 g/cc 0.306 lb/in³
Inconel Alloy 625 Density 8.44 g/cc 0.305 lb/in³
Inconel Alloy 718 Density 8.19 0.296 lb/in3 (8.192 g/cm3)

Inconel Alloy 625 Density*. 8440 [kg · m-3]
Inconel Alloy 625 Density: 0.303 lb/in3 (8.44 g/cm3)

Inconel Electrical Conductivity

Material Conductivity Resistivity Notes
(% IACS) (Siemens/m) (Ohm-m)  

Inconel 600




conductivity converted from resistivity

Inconel 600



conductivity converted from resistivity

Inconel 601



conductivity converted from resistivity

Inconel 617



conductivity converted from resistivity

Inconel 625



conductivity converted from resistivity

Inconel 690



conductivity converted from resistivity

Inconel 718



conductivity converted from resistivity

Inconel X750



conductivity converted from resistivity

Inconel Hardness

Inconel Rockwell Hardness, Inconel Strength

Material Hardness HB
Inconel Alloy 625 Bar
≤ 287 HB
Inconel Alloy 625 Sheet
Inconel Alloy 625 Tube
Seamless and Welded
Inconel Alloy 600 rod and bar
Inconel Alloy 600 Plate
Inconel Alloy 600 Sheet
88B max
Inconel Alloy 600 Tube and Pipe
88B max
Inconel Alloy 600 Wire
Inconel Alloy 600 Wire
Inconel Alloy 600 Wire

Inconel Heat Treatment

Heat Treatment Inconel Alloy 600 Inconel Alloy 600 is not an age hardening alloy; cold working is the only available means of hardening. Softening by annealing begins at about 1600°F (871°C), and is reasonably complete after 10 to 15 minutes of heating at 1800°F (982°C). Above this temperature, grain growth may be objectionable, although very brief heating at 1900°F will cause complete softening without undue grain growth. Since the rate of cooling has no effect on the softening, the material may be water quenched or air cooled.
Heat Treatment Inconel Alloy 625 Inconel Alloy 625 has three basic heat treatments:
(1) High Solution Anneal - 2000/2200°F (1093/1204°C), air quench or faster.
(2) Low Solution Anneal - 1700/1900°F (927/1038°C), air quench or faster.
(3) Stress Relieve - 1650°F (899°C), air quench.
Inconel Heat Shield Inconel (2200 deg F continuous).

Inconel Low Temperature

Inconel Alloy 718 temperature ranges from cryogenic up to 1400°F
Inconel Alloy 625 temperatures ranging from cryogenic to 2000°F

Inconel Melting Point

Inconel Alloy 718 Melting Range Solution Treated: 2500-2600°F
Solution Treated and Aged: 1370-1430°C
Inconel Alloy 600 Melting Range Metric: 1354 - 1413 °C
English: 2470 - 2580 °F
Inconel Alloy 625 Melting Range 2350 - 2460°F (1280 - 1350°C)

Inconel Thermal Conductivity

Inconel Thermal Properties, Inconel Thermal Expansion

Inconel Alloy 600 Thermal Conductivity

Metric: 14.9 W/m-K
English: 103 BTU-in/hr-ft²-°F

Inconel Alloy 625 Thermal Conductivity Metric: 9.8 W/m-K
English: 68 BTU-in/hr-ft²-°F

Inconel Temperature Limits

Inconel Alloy 600 Heat Capacity

Metric: 0.444 J/g-°C
English: 0.106 BTU/lb-°F

Inconel Alloy 625 Heat Capacity Metric: 0.41 J/g-°C
English: 0.098 BTU/lb-°F

Inconel Mechanical Properties

Typical Mechanical Properties

Inconel Machinability and Inconel Yield Strength

Material Form and Condition Tensile Strength Yield Strength Elongation % Hardness, Rockwell
ksi MPa ksi MPa
Inconel Alloy 600 rod and bar Cold drawn Annealed 80-100 550-690 25-50 170-345 55-35 65-85B
Inconel Alloy 600 Plate Hot rolled Annealed 80-100 550-725 30-50 205-345 55-35 65-85B
Inconel Alloy 600 Sheet Cold Rolled Annealed 80-100 550-690 30-45 205-310 55-35 88B max
Inconel Alloy 600 Tube and Pipe Cold Drawn Annealed 80-100 550-690 25-50 170-345 55-35 88B max
Inconel Alloy 600 Wire Cold Drawn Annealed 80-120 550-830 35-75 240-520 45-20 -
Inconel Alloy 600 Wire Cold Drawn No 1 Temper 105-135 725-930 70-105 480-725 35-15 -
Inconel Alloy 600 Wire Spring Temper 170-220 1170-1520 150-210 1035-1450 5-2 -
Inconel Alloy 625 Bar Annealed 120 827 60 414 30 ≤ 287 HB
Inconel Alloy 625 Sheet Annealed 120 827 60 414 30 145-240
Inconel Alloy 625 Tube
Seamless and Welded
Annealed 120 827 60 414 35 -

Inconel Material Weight Calculator

Click on below for Inconel Weight Calculator

Inconel Uns Number

Inconel Uses, Applications & Client Reference

Inconel Alloy is suitable for High Temperature like Plant manufacturing, Machine engineering, Power generation and Powerplant etc. We are supplying best quality inconel products to our clients globally.

Tuas Power Generation
60 Tuas South Avenue 9, Singapore 637607

Cummins Power Generation (S) Pte Ltd
10 Toh Guan Rd, Singapore 608838

Barakah Nuclear Power Plant
Barakah - Abu Dhabi - United Arab Emirates

Power Electric Switchgear Factory
Abu Dhabi - United Arab Emirates

Shams Solar Power Station
Madinat Zayed- Al Gharbia- - Abu Dhabi - UAE

Hassyan Power Plant
Dubai - United Arab Emirates

AKSA Power Generation FZE
Jebel Ali Free Zone - Dubai - United Arab Emirates

Al Mirfa Power and Desalination Plant
Al Mirfa - Abu Dhabi - United Arab Emirates

U-Power Generation FZC
Sharjah International Airport - Sharjah - United Arab Emirates

Fujairah F2 Plant
Fujairah - United Arab Emirates

Fayfa Chemicals Factory LLC
22A, AL QUOZ INDUSTRIAL AREA 3 - Dubai - United Arab Emirates

Inconel Ultrasonic Velocity

Inconel Ultrasonic Testing

Material in/sec m/sec
INCONEL 224400 5699.76

Inconel Welding

Useful Tips for Welding Inconel Alloy

Inconel alloy is a nickel-chromium alloys which is used in different welding processes. Inconel alloy is most commonly used in techniques where high heat tolerance is required. Welding Inconel can be rather difficult because the welds that are created have a tendency to crack. There are a few alloys of Inconel that were specifically designed for use in welding like TIG.

Inconel Galvanic Corrosion

A galvanic series in sea water is presented in Figure 7 showing inconel alloy 625 to be very noble com-pared to many of the other alloys. Thus, inconel alloy 625 will usually behave as a cathode when in contactwith other materials in sea water.

Inconel For Sale

Are you looking for Aerospace Structural Materials? Aerospace Materials Suppliers, Aerospace Materials Standards, Aerospace Materials Australia, Aerospace Grade Materials, Aerospace Industry Materials, Aerospace Materials Manufacturing, Aerospace Raw Materials, Russian Aerospace Materials, Aerospace Materials UK, Aerospace Materials Used, Aerospace Wing Materials, Aircraft Building Materials, Aircraft Body Materials, Aircraft Construction Materials, Aircraft Grade Materials, Aircraft Making Materials, Aircraft Structure Materials.

FAQ: Inconel Ferrous Or Nonferrous
Answer : Inconel is Non ferrous because it consists mostly of Nickel with only a small amount of Iron in its chemistry.

Inconel alloy Inconel 600
Inconel 601
Inconel 625
Inconel 718

Plate:3.0~60.0mm (THK) *1000mm (WIDTH) *2000mm (LENGTH)



Strip:0.1~3.0mm(THK)*≤ 420mm (WIDTH)

Seamless pipe:6mm~219mm(OD)*0.5mm~18mm(WT)

Welded tube:1mm~120mm(OD)*0.1mm~10mm(WT)

U Shape pipe: 10mm~40mm (OD)*0.5-5mm (WT)

Flange: 3/8” ~48” (DN10 ~DN1200)

Tee: 1/2”~48”* SCH 5-SCH160/XXS(WT)

Monel alloy Monel 400
Monel K500
Nickel 52
Nickel alloy Nickel 200
Nickel 201
Hastelloy C276
Hastelloy alloy Hastelloy C22
Hastelloy B2
Hastelloy X
Invar alloy Invar 36
Kovar alloy Kovar 29
Incoloy 800
Incoloy 800H
Incoloy alloy Incoloy 800HT
Incoloy 825

As a stockiest of Inconel Materials, we have been successfully catering for the needs of the Oil & Gas, Aerospace, Nuclear Power industry in USAUKCanada , AustraliaIsraelChinaRussiaSwedenNetherlandsFranceGermanyItalySingaporeSouth KoreaMalaysiaTurkeyIndonesiaMexicoSpain and Saudi Arabia etc.

Inconel manufacturers | Inconel suppliers | Inconel stockist in India | Inconel Stock